Passer au contenu du produit
1 sur 2

O2 Oxygen Sensor Upstream Downstream for Chevrolet Equinox (2011-2014) 2.4L



Prix normal $32.95
Prix promotionnel $32.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit O2 Sensor Kit for 2011-2014 Chevrolet Equinox (GMT172)

What it Does: This matched upstream and downstream O2 sensor kit measures exhaust oxygen on the 2011-2014 Chevrolet Equinox (GMT172) LAF / LEA 2.4L Ecotec so the ECM maintains proper air-fuel ratios.

The Stock Chevrolet Equinox Sensor Failure

On the GMT172 chassis powered by the LAF / LEA 2.4L Ecotec engine, OEM oxygen sensors suffer from severe exhaust gas thermal cycling and carbon or oil-vapor contamination. Over time, the zirconia element loses switching speed and the internal heater circuit degrades or burns open. This sluggish signal triggers P0135, P0141, or P0171 fault codes and forces rich open-loop fueling.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Stored P0135, P0141, or P0420 codes from open heater circuits or slow switching.
  • Rough Idle & Hesitation: Fouled sensing tips delay closed-loop trim, causing uneven throttle response and soot buildup.
  • Poor MPG & Emissions Failure: Rich open-loop operation wastes fuel, overheats the catalytic converter, and fails readiness checks.

The Direct-Fit Upstream & Downstream O2 Solution

Installing a matched upstream and downstream set restores balanced pre- and post-catalyst voltage signals on your GMT172 Equinox. Each direct-fit sensor uses a corrosion-resistant stainless steel shell, a responsive zirconia ceramic core, and OEM-spec heater resistance for rapid cold-start light-off. Factory-length leads with sealed OE-style connectors plug straight into the LAF / LEA 2.4L Ecotec harness without cutting or splicing.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2011-2014 Chevrolet Equinox
Engine / Chassis LAF / LEA 2.4L Ecotec / GMT172
Emissions & Sensor Spec Direct-Fit Heated Zirconia (Upstream & Downstream)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)

Compatibility

  • 2011 Chevrolet Equinox (2.4L)
  • 2012 Chevrolet Equinox (2.4L)
  • 2013 Chevrolet Equinox (2.4L)
  • 2014 Chevrolet Equinox (2.4L)

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT172 Equinox?

Yes. Fits 2011-2014 Chevrolet Equinox with the LAF / LEA 2.4L Ecotec. Excludes V6 models; confirm your 2.4L engine before ordering.

Will this clear P0135, P0141, or P0420 codes?

Yes, if sensors failed. New units resolve P0135 and P0141 heater faults, though persistent P0420 codes can indicate a worn catalytic converter.

Is wire splicing required for installation?

No. Both sensors use direct-fit connectors; thread cleanly into factory bungs and torque to specification.

The Chevrolet Precision Standard

Engineered for accurate ECM telemetry and emissions compliance, this matched O2 sensor kit keeps your 2.4L Equinox running efficiently without check engine lights. Built for sustained exhaust heat, it restores factory closed-loop fuel control.




Ajustement

Faire

Chevrolet

Cylindrée

  • 2.4L

Année

  • 2011
  • 2012
  • 2013
  • 2014

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Chevrolet Equinox (2011-2014) 2.4L

$32.95