Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Chevrolet Corvette (2009-2011) 6.2L



Prix normal $56.95
Prix promotionnel $56.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2009-2011 Chevrolet Corvette (C6)

What it Does: This 4-piece oxygen sensor kit monitors exhaust oxygen levels on the 2009-2011 Chevrolet Corvette C6 (LS3 6.2L V8) to regulate closed-loop fuel trims and catalytic converter efficiency.

The Stock Chevrolet Corvette Sensor Failure

Factory narrowband zirconia sensors on the C6 Corvette equipped with the LS3 6.2L V8 endure intense exhaust heat soak, thermal cycling, and carbon contamination. Over time, internal platinum electrode wear and heater circuit burnout cause sluggish rich-to-lean voltage switching. Delayed signal response triggers P0135, P0155, or P0133 codes, forcing open-loop fuel enrichment that skews fuel trims and risks overheating catalytic substrates.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Faults like P0135, P0155, P0133, or P0420/P0430 trigger when heater elements open-circuit or response slows.
  • Fuel Trim Drift: Contaminated sensing tips report false lean conditions, pushing fuel trims positive (P0171/P0174) and causing rich exhaust odor.
  • Drivability & Emissions Loss: Lagging closed-loop control causes rough idle, throttle hesitation, poor fuel economy, and failed OBD-II readiness monitors.

The Direct-Fit 4-Piece Oxygen Sensor Solution

Built as a direct replacement for LJT836233S01, this matched four-sensor kit restores crisp closed-loop air-fuel metering across both exhaust banks on your C6. Each unit uses a fast-heating planar zirconia ceramic element inside a corrosion-resistant stainless steel housing to withstand exhaust condensation and thermal shock. Factory-indexed OEM connectors and pre-coated threads install directly into stock exhaust bungs without cutting or splicing, restoring stable ECM voltage feedback.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2009-2011 Chevrolet Corvette
Engine / Chassis LS3 6.2L V8 / C6
Sensor Architecture 4-Wire Heated Zirconia / Direct-Fit OEM Connectors
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # LJT836233S01

Compatibility

  • 2009-2011 Chevrolet Corvette 6.2L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the C6 Corvette?

Yes. This is a direct fit for the 2009-2011 Chevrolet Corvette equipped with the LS3 6.2L V8 engine. Excludes 7.0L LS7 Z06 models; confirm your 6.2L engine prior to ordering.

Will this clear P0135, P0155, or fuel trim codes?

Yes, when sensors are at fault. Replacing all four sensors as a matched set resolves open heater and slow-response faults like P0135, P0155, and P0171/P0174 once cleared with a scan tool, assuming no exhaust or vacuum leaks exist.

Is wiring modification or special prep required for installation?

No splicing is needed. Each sensor includes direct-fit OEM connectors; clean the exhaust bung threads, hand-start to avoid cross-threading, and torque with an O2 sensor socket.

The Chevrolet Performance Standard

Accurate closed-loop fuel control is critical for crisp throttle response and exhaust flow balance on the C6 platform. Refreshing all four sensors together keeps your LS3 6.2L V8 running efficiently under street and spirited driving loads.




Ajustement

Faire

Chevrolet

Cylindrée

  • 6.2L

Année

  • 2009
  • 2010
  • 2011

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Chevrolet Corvette (2009-2011) 6.2L

$56.95