Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Chevrolet Aveo (2009-2011) 1.6L



Prix normal $36.95
Prix promotionnel $36.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2009-2011 Chevrolet Aveo (T250)

What it Does: This matched upstream and downstream oxygen sensor kit monitors pre- and post-catalyst exhaust oxygen levels on the 2009-2011 Chevrolet Aveo T250 with the LXV 1.6L engine to regulate air-fuel ratio and verify catalyst efficiency.

The Stock Chevrolet Aveo O2 Sensor Failure

On the T250 chassis with the LXV 1.6L engine, factory oxygen sensors endure extreme exhaust heat and continuous thermal cycling. Over time, internal heaters burn out, carbon soot fouls the ceramic tip, and moisture corrodes harness pins. This thermal fatigue slows upstream switching speed and degrades downstream catalyst monitoring, triggering P0133, P0135, or P0141 codes and forcing rich open-loop fueling.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0133 (slow response), P0135/P0141 (heater circuit failure), or P0171/P0172 fuel trim faults.
  • Sluggish Switching & Rich Exhaust: Fouled zirconia elements stall voltage transitions, causing dark tailpipe soot and raw fuel odor.
  • Poor Economy & Emissions Failure: Open-loop ECM fueling reduces MPG, causes rough idle, and fails emissions tests.

The Direct-Fit Planar Zirconia O2 Sensor Solution

Replacing both sensors as a matched pair restores closed-loop ECM control across the LXV 1.6L exhaust stream. Each unit uses a laser-welded stainless steel body housing a fast-acting planar zirconia element and ceramic heater for rapid light-off. Factory-indexed 4-wire OEM connectors and pre-applied thread anti-seize deliver plug-and-play fitment matching 234-4290 and 234-4298 without cutting or splicing.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2009-2011 Chevrolet Aveo
Engine / Chassis LXV 1.6L / T250
Emissions & Substrate Heated Planar Zirconia Ceramic / 4-Wire Narrowband
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-4290, 234-4298

Compatibility

  • 2009-2011 Chevrolet Aveo (1.6L)

Frequently Asked Questions & Fitment Warnings

Does this fit the T250 Aveo?

Yes. This is a direct fit for the 2009-2011 Chevrolet Aveo equipped with the LXV 1.6L engine. Confirm engine displacement is 1.6L before ordering; excludes 2004-2008 E-TEC II models.

Will this clear P0135 or P0141 codes, and are both sensors included?

Yes. Installing both upstream (234-4290) and downstream (234-4298) sensors resolves heater circuit and slow-response codes like P0133, P0135, and P0141 once ECM memory is cleared.

Is any wiring modification required for installation?

No. Both sensors include factory-terminated 4-wire OEM connectors for plug-and-play installation onto the T250 harness using a standard 22mm O2 socket.

The Chevrolet Emissions Precision Standard

Engineered for emissions compliance and accurate closed-loop ECM feedback, this matched O2 sensor set keeps your T250 Aveo running CEL-free. Maintain factory fuel efficiency and protect your catalytic converter from rich-condition damage.




Ajustement

Faire

Chevrolet

Cylindrée

  • 1.6L

Année

  • 2009
  • 2010
  • 2011

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Chevrolet Aveo (2009-2011) 1.6L

$36.95