Passer au contenu du produit
1 sur 3

O2 Oxygen Sensor Upstream Downstream for Cadillac Escalade (2003-2005) 5.3L



Prix normal $49.95
Prix promotionnel $49.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit O2 Oxygen Sensor Kit for 2003-2005 Cadillac Escalade (GMT800)

What it Does: This 4-piece O2 sensor kit monitors pre- and post-cat exhaust oxygen on the 2003-2005 Cadillac Escalade (GMT800) LM7 5.3L to regulate fuel trim.

The Stock Cadillac Escalade Oxygen Sensor Failure

On the GMT800 equipped with the LM7 5.3L V8, factory oxygen sensors endure severe exhaust heat soak, thermal cycling, and road splash corrosion. Over high mileage, carbon and ash foul the ceramic element, causing lazy switching and skewed fuel trim calculations. Internal heater circuits also degrade and open-circuit, triggering P0135, P0155, or P0141 codes. Sluggish downstream voltage can also set P0420 and P0430 efficiency faults.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Stored heater or response faults like P0135, P0155, P0141, P0420, and P0430.
  • High Fuel Consumption: Rich open-loop fueling and rough idle from delayed upstream switching.
  • Failed Emissions Readiness: Incomplete O2 and catalyst monitors causing inspection failures and hesitation.

The Direct-Fit Zirconia Oxygen Sensor Solution

This matched 4-piece kit services both upstream and downstream positions on your GMT800 LM7 5.3L in one job. Each sensor uses a fast-light-off heated zirconia element inside a corrosion-resistant stainless steel housing to survive continuous exhaust heat. OEM-style connectors provide true plug-and-play installation into the factory harness without cutting or splicing. Replacing all four sensors together restores balanced bank-to-bank fuel trims and accurate catalyst monitoring.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2003-2005 Cadillac Escalade
Engine / Chassis LM7 5.3L V8 / GMT800
Emissions & Substrate Upstream & Downstream / Heated Zirconia Ceramic
Installation Type Direct Bolt-On OEM Replacement (No Splicing or Welding)

Compatibility

  • 2003-2005 Cadillac Escalade (5.3L V8)

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT800 Escalade?

Yes. This fits the 2003-2005 Cadillac Escalade with the LM7 5.3L engine. Excludes 6.0L LQ9 models; confirm engine displacement and connector style before ordering.

Will this clear P0135 or P0420 codes?

Yes, when sensor-related. Replacing faulty units resolves P0135 and P0155 codes; clear stored DTCs and complete a drive cycle afterward.

Are these plug-and-play with OEM connectors?

Yes. Direct-fit connectors eliminate splicing. Hand-thread each sensor before torquing to spec, and keep anti-seize or grease strictly off the sensing tip.

The Cadillac Precision Standard

Engineered for thermal durability under SUV towing and highway loads. Matched sensor response ensures emissions readiness and CEL-free operation on your GMT800.




Ajustement

Faire

Cadillac

Cylindrée

  • 5.3L

Année

  • 2003
  • 2004
  • 2005

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Cadillac Escalade (2003-2005) 5.3L

$49.95