Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for BMW X5 (2011-2013) 3.0L



Prix normal $300.95
Prix promotionnel $300.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit 4-Piece O2 Sensor Kit for 2011-2013 BMW X5 (E70)

What it Does: This 4-piece upstream and downstream oxygen sensor kit restores closed-loop air-fuel monitoring and catalyst feedback for the 2011-2013 BMW X5 (E70) with the 3.0L (N55) engine.

The Stock BMW X5 Sensor Failure

Factory oxygen sensors on the E70 chassis with the N55 3.0L endure extreme exhaust heat and thermal cycling near the turbocharger outlet. Over time, internal ceramic sensing elements suffer thermal shock, carbon or oil-ash fouling, and heater circuit burnout. Delayed voltage switching skews DME fuel trims, triggering P0130, P0133, and P0141 fault codes while risking catalytic converter overheating.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light: DME codes P0133 (slow response), P0141 (heater fault), or P0420 catalyst warnings.
  • Erratic Fuel Trims: Fueling bias (P0171/P0172) causing rough idle, hesitation, and poor MPG.
  • Failed Emissions: Incomplete readiness monitors or elevated tailpipe emissions during open-loop fueling.

The Direct-Fit Oxygen Sensor Solution

Replacing all four sensors as a matched set restores balanced pre-cat lambda control and accurate post-cat catalyst monitoring across the E70 exhaust system. Each direct-fit unit uses a laser-welded stainless steel housing, high-temp internal heater core, and factory-calibrated sensing element for rapid light-off and crisp switching response. Heat-shielded harnesses and weatherproof connectors plug straight into factory receptacles without cutting or splicing.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2011-2013 BMW X5
Engine / Chassis 3.0L N55 / E70
Sensor Architecture Direct-Fit Heated O2 (2 Upstream / 2 Downstream)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)

Compatibility

  • 2011-2013 BMW X5 3.0L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the E70 X5?

Yes. Direct fit for 2011-2013 BMW X5 E70 models with the 3.0L gasoline (N55) engine. Excludes 3.0L diesel and 4.4L V8 trims; confirm engine before ordering.

Will this clear P0133 or P0141 codes?

Yes, if sensor-related. New sensors restore heater continuity and lambda response to clear P0133/P0141 codes on the E70 DME, though damaged converters still trigger P0420.

Is wire splicing required for installation?

No. All four sensors feature factory-style connectors; torque into clean bungs and clear DME adaptations.

The BMW Precision Standard

Accurate exhaust lambda feedback maintains factory emissions compliance and smooth DME fueling on the E70 platform, restoring crisp closed-loop control and CEL-free operation.




Ajustement

Faire

BMW

Cylindrée

  • 3.0L

Année

  • 2011
  • 2012
  • 2013

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for BMW X5 (2011-2013) 3.0L

$300.95