O2 Oxygen Sensor Upstream Downstream for BMW X1 (2016-2019) 2.0L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2016-2019 BMW X1 (F48)
What it Does: This 2-piece upstream and downstream oxygen sensor kit for the 2016-2019 BMW X1 F48 equipped with the B46 / B48 2.0L engine monitors pre-catalytic air-fuel ratios and post-catalytic converter efficiency for accurate ECU fuel trim control.
The Stock BMW X1 O2 Sensor Failure
On the F48 chassis powered by the B46 / B48 2.0L turbocharged engine, factory oxygen sensors endure severe exhaust heat soak and carbon contamination directly downstream of the turbocharger outlet. Over high mileage, the internal zirconia sensing element degrades while internal heater circuits burn out from continuous thermal cycling. A slow or biased sensor skews lambda readings sent to the DME, disrupting fuel trims and triggering codes like P0130, P0135, P0141, or P0420.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light & Lambda DTCs: Stored fault codes such as P0130, P0135, P0141, or P0420 caused by delayed sensor response or open heater circuits.
- Rough Idle & Throttle Hesitation: Biased pre-cat feedback forces inaccurate fuel trim corrections, leading to stumble and inconsistent drivability.
- Higher Fuel Consumption & Failed Emissions: Rich running defaults and incomplete readiness monitors prevent emissions test passage.
The Direct-Fit Upstream & Downstream Oxygen Sensor Solution
This matched 2-piece sensor kit replaces both pre-catalytic and post-catalytic positions simultaneously, restoring synchronized lambda feedback across the exhaust stream. Each unit utilizes precision-calibrated sensing elements, heat-resistant stainless housings, and factory-style weatherproof connectors matching OE numbers 234-5166 and 234-4971 without wire splicing. Direct-fit thread geometry and pre-terminated harnesses ensure leak-free installation into factory exhaust bungs, allowing the B46 / B48 2.0L DME to stabilize fuel trims and complete emissions readiness monitors.
What's Included
- 1x Upstream (Pre-Catalytic Converter) Oxygen Sensor
- 1x Downstream (Post-Catalytic Converter) Oxygen Sensor
Technical Specifications
| Fitment | 2016-2019 BMW X1 |
|---|---|
| Engine / Chassis | B46 / B48 2.0L Turbo I4 / F48 |
| Sensor Architecture | Direct-Fit Pre-Cat Upstream & Post-Cat Downstream Heated O2 Sensors |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Splicing) |
| Replaces OEM Part # | 234-5166, 234-4971 |
Compatibility
- 2016-2019 BMW X1 2.0L (F48 Chassis) — Confirm engine displacement, model year, and connector style prior to ordering
Frequently Asked Questions & Fitment Warnings
Does this fit the F48 X1?
Yes. This is a direct fit for the 2016-2019 BMW X1 equipped with the B46 / B48 2.0L engine. Do not assume coverage for other engines, model years, or mismatched connector styles even when the body style looks identical.
Will this clear P0135, P0141, or P0420 codes?
Yes, when failing sensors are the cause. Installing matched sensors referencing 234-5166 and 234-4971 restores proper lambda feedback; clear stored codes after installation and complete a full drive cycle so readiness monitors reset.
Are wire splicing or special sealants needed for installation?
No splicing is required. Both sensors come with direct-fit connectors; keep grease and anti-seize off the sensing tip, thread each body in by hand, and tighten to factory torque specification.
The BMW Precision Standard
Built to maintain strict European emissions tolerances and DME feedback accuracy, this matched sensor pair restores clean combustion and CEL-free operation on your F48 X1. Replacing both positions together prevents response lag from an aged partner sensor and protects catalytic converter longevity.
Ajustement
Ajustement
|
Faire |
BMW |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$88.95