Passer au contenu du produit
1 sur 4

O2 Oxygen Sensor Upstream Downstream for Audi Q7 (2007-2010) 4.2L



Prix normal $191.95
Prix promotionnel $191.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2007-2010 Audi Q7 (4L)

What it Does: This matched 4-piece oxygen sensor kit monitors pre- and post-catalyst exhaust oxygen on the 2007-2010 Audi Q7 (4L) BAR 4.2L V8 to maintain closed-loop fuel trims and catalyst efficiency.

The Stock Audi Q7 Oxygen Sensor Failure

On the 4L chassis with the BAR 4.2L V8 engine, factory oxygen sensors endure severe exhaust heat cycling and carbon contamination. Over time, combustion deposits foul the zirconia element while thermal shock fractures internal ceramic heater circuits and corrodes connector pins. As switching speed slows or heater resistance spikes, the ECU loses bank-to-bank closed-loop trim control, triggering P0130, P0150, P0135, and P0155 fault codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Stored codes including P0130/P0150 (circuit/slow response), P0135/P0155 (heater circuit failure), or P0171/P0174 lean fuel trims.
  • Sluggish Switching & Rough Idle: Delayed voltage transitions prevent real-time air-fuel corrections, causing uneven idle and throttle hesitation.
  • Fuel Economy Drop & Emissions Failure: Rich open-loop defaulting fouls catalytic substrates and blocks OBD-II readiness monitors.

The Direct-Fit Matched Oxygen Sensor Solution

Replacing all four sensors as a matched set restores symmetrical air-fuel feedback across both cylinder banks. Each direct-fit unit utilizes a stainless steel body, laser-welded shield, and fast-light-off planar zirconia element engineered for high 4.2L V8 exhaust temperatures. Factory-style weatherproof connectors and pre-coated threads align with 234-8089 specifications, ensuring rapid heater warm-up, crisp millivolt switching, and bolt-on installation into OEM exhaust bungs.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2007-2010 Audi Q7
Engine / Chassis BAR 4.2L V8 / 4L
Sensing Architecture Direct-Fit Heated Zirconia (2 Upstream / 2 Downstream)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-8089

Compatibility

  • 2007-2010 Audi Q7 4.2L

Frequently Asked Questions & Fitment Warnings

Does this fit the 4L Q7?

Yes. This is a direct fit for the 2007-2010 Audi Q7 equipped with the BAR 4.2L V8 engine. Does not fit 3.6L VR6 or 3.0L TDI diesel models—confirm engine displacement before ordering.

Will this clear P0130/P0150 and heater circuit DTCs?

Yes. Installing a matched sensor set restores factory heater resistance and O2 switching speed to resolve sensor-induced P0130–P0161 codes once cleared via OBD-II scanner, assuming intact wiring and converters.

Is wiring splicing required during installation?

No. All four units feature direct-fit OEM plugs for plug-and-play installation; torque sensors to spec using a 22mm O2 socket.

The Audi Precision Standard

Calibrated for strict Euro ECU tolerances, this matched sensor kit maintains accurate closed-loop fuel control and CEL-free operation. Restore factory emissions compliance and consistent V8 drivability without universal wiring splices.




Ajustement

Faire

Audi

Cylindrée

  • 4.2L

Année

  • 2007
  • 2008
  • 2009
  • 2010

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Audi Q7 (2007-2010) 4.2L

$191.95