Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Acura RDX (2013-2017) 3.5L



Prix normal $165.95
Prix promotionnel $165.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2013-2017 Acura RDX (TB3/TB4)

What it Does: This 4-piece upstream and downstream O2 sensor kit measures exhaust oxygen on the 2013-2017 Acura RDX (TB3/TB4) J35Z2 3.5L V6 to regulate air-fuel ratio and catalyst monitoring.

The Stock Acura RDX Oxygen Sensor Failure

On the TB3/TB4 chassis with the J35Z2 3.5L V6, sustained exhaust heat cycles fatigue internal sensor heater circuits and zirconia sensing elements. Fuel contaminants, oil ash, and moisture foul the platinum electrodes, causing sluggish voltage response or open heater resistance. When upstream air-fuel or downstream sensors drift, the PCM logs P0134, P0135, P0155, or P0141 and defaults to rich open-loop fuel trim operation.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light: Codes P0135, P0155, or P0141 indicate heater or circuit failure.
  • Rich Fuel Trim: Skewed feedback causes rough idle, hesitation, and fuel odor.
  • Failed Emissions: Open-loop fueling drops MPG and fails inspection.

The Direct-Fit Planar Zirconia Sensor Solution

Replacing all four sensors as a matched set restores balanced Bank 1 and Bank 2 feedback across both catalytic converters. Each direct-fit unit pairs a fast-light-off planar zirconia element with a double-laser-welded stainless steel housing to resist thermal shock and moisture. Pre-terminated OE connectors and factory-spec threads match 234-5056 and 234-4781, allowing plug-and-play installation into the factory exhaust manifold and mid-pipe bungs without wire splicing.

What's Included

  • 2x Upstream Oxygen Sensors
  • 2x Downstream Oxygen Sensors

Technical Specifications

Fitment 2013-2017 Acura RDX
Engine / Chassis J35Z2 3.5L V6 / TB3/TB4
Sensor Architecture Heated Planar Zirconia (Upstream A/F & Downstream O2)
Installation Type Direct Thread-In OEM Replacement (No Splicing)
Replaces OEM Part # 234-5056, 234-4781

Compatibility

  • 2013-2017 Acura RDX 3.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the TB3/TB4 RDX?

Yes. Direct fit for the 2013-2017 Acura RDX with the J35Z2 3.5L V6. Excludes 2.3L and 2.0L turbo models; confirm 3.5L engine before ordering.

Will this clear P0135, P0155, and P0141 codes?

Yes. Replacing both upstream (234-5056) and downstream (234-4781) pairs resolves Bank 1 and Bank 2 sensor codes once cleared.

Are factory-style connectors included for installation?

Yes. Each sensor includes an OE-style plug-and-play connector; clean bung threads and torque to spec while keeping anti-seize off the sensor tip.

The Acura Precision Standard

Built to restore closed-loop fuel accuracy and emissions compliance on the TB3/TB4, this kit keeps your J35Z2 3.5L V6 CEL-free. Expect reliable efficiency and crisp throttle response.




Ajustement

Faire

Acura

Cylindrée

  • 3.5L

Année

  • 2013
  • 2014
  • 2015
  • 2016
  • 2017

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Acura RDX (2013-2017) 3.5L

$165.95