Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Acura MDX (2003-2006) 3.5L



Prix normal $174.95
Prix promotionnel $174.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2003-2006 Acura MDX (YD1)

What it Does: This 4-piece sensor kit monitors pre- and post-catalyst exhaust oxygen on the 2003-2006 Acura MDX (YD1) J35A5 3.5L V6 for closed-loop fuel control.

The Stock Acura MDX Sensor Failure

On the YD1 chassis equipped with the J35A5 3.5L V6, factory upstream air-fuel and downstream oxygen sensors endure severe thermal cycling and soot contamination. Over time, internal zirconia elements suffer carbon fouling or micro-fractures, while internal heater circuits burn out under load. Slow switching skews PCM feedback, triggering P0135, P0155, or P0171/P0174 faults and forcing open-loop rich operation.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0134, P0135, or P0155 from open heater circuits or sluggish voltage transitions.
  • Fuel Trim Imbalance: Skewed feedback causes hesitation, rough idle, and P0171/P0174 lean-condition codes.
  • Reduced Economy & Failed Emissions: Forces rich open-loop fueling, dropping MPG and preventing emissions readiness.

The Direct-Fit Upstream & Downstream Oxygen Sensor Solution

This matched four-sensor kit replaces all bank 1 and bank 2 upstream and downstream units simultaneously, matching OEM specifications for DNT224 and 234-5010. Laser-welded stainless steel housings and high-temp zirconia sensing elements resist thermal shock and moisture intrusion under extreme exhaust heat. Pre-wired OEM connectors and exact-length harnesses allow direct plug-and-play installation into factory manifold and converter bungs without splicing.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2003-2006 Acura MDX
Engine / Chassis J35A5 3.5L V6 / YD1
Sensor Architecture Upstream Wideband AFR & Downstream Heated O2 (Direct-Fit)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # DNT224, 234-5010

Compatibility

  • 2003-2006 Acura MDX 3.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the YD1 MDX?

Yes. Fits 2003-2006 Acura MDX models with the J35A5 3.5L V6. Confirm 3.5L engine before ordering; excludes 2001-2002 J35A3 and 2007+ 3.7L models.

Will this clear P0135 or P0155 codes?

Yes. Replacing failed sensors restores heater resistance and switching speed to clear P0135, P0155, and sensor-related P0171/P0174 codes after PCM reset.

Is splicing required for installation?

No. Direct-fit OEM connectors bolt into factory bungs without cutting wires; torque sensors cleanly using an O2 socket.

The Acura Precision Standard

Matched upstream and downstream feedback keeps your J35A5 operating at peak stoichiometric precision for CEL-free emissions compliance. Direct-fit construction restores factory ECU response and stable fuel economy.




Ajustement

Faire

Acura

Cylindrée

  • 3.5L

Année

  • 2003
  • 2004
  • 2005
  • 2006

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Acura MDX (2003-2006) 3.5L

$174.95