Passer au contenu du produit
1 sur 3

O2 Oxygen Sensor Upstream Downstream for Acura ILX (2013-2014) 2.0L



Prix normal $92.95
Prix promotionnel $92.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Upstream & Downstream O2 Sensor Kit for 2013-2014 Acura ILX (DE1)

What it Does: This upstream and downstream O2 sensor kit monitors exhaust oxygen on the 2013-2014 Acura ILX (DE1) R20A5 2.0L to regulate fuel trim and catalyst efficiency.

The Stock Acura ILX O2 Sensor Failure

Over time, OEM oxygen sensors on the DE1 platform equipped with the R20A5 2.0L engine suffer ceramic thermal shock, internal heater circuit burnout, and carbon glazing. Exhaust heat soak near the cylinder head degrades the upstream zirconia sensing cell, slowing voltage switching response. This sluggish feedback forces the ECU into rich open-loop fuel mapping, triggering P0134, P0135, and P0141 diagnostic fault codes.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Codes P0134, P0135, P0141, or P0420 signal heater failure or slow switching.
  • Rough Idle & Rich Running: Delayed feedback causes over-fueling, fouled plugs, and unstable idle.
  • Poor MPG & Failed Emissions: Uncorrected enrichment drops fuel economy and fails OBD-II readiness.

The Direct-Fit O2 Sensor Solution

This matched upstream and downstream kit replaces Bank 1 Sensor 1 and Sensor 2 together to restore precise closed-loop fueling. Built with stainless steel housings, protective PTFE breather membranes, and laser-welded seams, each sensor resists thermal shock and moisture intrusion. Factory-length harnesses, OEM connectors, and pre-applied anti-seize threads match 250-54065 and 15286 specifications for direct plug-and-play installation without any wire splicing.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2013-2014 Acura ILX
Engine / Chassis R20A5 2.0L / DE1
Sensor Architecture Heated Zirconia / Direct-Fit OEM Plug
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Splicing)
Replaces OEM Part # 250-54065, 15286

Compatibility

  • 2013 Acura ILX 2.0L
  • 2014 Acura ILX 2.0L

Frequently Asked Questions & Fitment Warnings

Does this fit the DE1 ILX?

Yes. Direct fit for the 2013-2014 Acura ILX with the R20A5 2.0L engine. Excludes 2.4L (K24Z7) and 1.5L Hybrid trims; confirm engine before ordering.

Will this clear P0135 and P0141 codes?

Yes. Replacing both sensors restores heater resistance and switching speed, clearing P0134, P0135, and P0141 after DTC reset.

Are OEM connectors and thread prep included?

Yes. Both include factory-style connectors and anti-seize threads; install using a 22mm O2 socket.

The Acura Precision Standard

Built for accurate ECU communication, optimal closed-loop MPG, and CEL-free emissions compliance on the DE1 chassis.




Ajustement

Faire

Acura

Cylindrée

  • 2.0L

Année

  • 2013
  • 2014

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Acura ILX (2013-2014) 2.0L

$92.95