Intercooler Kit for Volkswagen Golf GTI R (2015-2017) 2.0L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
Aluminum Twin Intercooler Kit for 2015-2017 Volkswagen Golf GTI,Golf R (Mk7)
What it Does: This aluminum twin intercooler kit supplements the charge-air cooling system on the 2015-2017 Volkswagen Golf GTI and Golf R (Mk7 / EA888 Gen 3 2.0L TSI) to lower intake air temperatures and prevent thermal heat soak under boost.
The Stock Volkswagen Golf GTI,Golf R Charge-Air Cooling Bottleneck
Mounted between the AC condenser and engine radiator, the factory intercooler on the Mk7 platform suffers from restricted ambient airflow and rapid thermal saturation. Under sustained boost on the EA888 Gen 3 2.0L TSI (CXCA/CXCB/CYFB), elevated intake air temperatures force the ECU to retard ignition timing and bleed boost pressure. Additionally, factory crimped plastic end tanks can fatigue under repeated heat cycles, triggering P0299 underboost or P0111 IAT range faults.
Common Symptoms of a Failing OEM Intercooler
- Check Engine Light / DTCs: Triggered P0299 (underboost condition) or P0111 (IAT sensor range/performance) caused by cracked plastic end tanks or severe core heat soak.
- Audible Boost Leaks: Whistling under throttle load accompanied by oil vapor seepage around factory charge-pipe couplers.
- Timing Pull & Misfires: Sluggish throttle response, elevated knock retard, or P0300 misfires during warm-weather pulls.
The High-Flow Twin-Core Intercooler Solution
Engineered to reference part 03CSJ031ABK, this silver aluminum twintercooler mounts in the lower bumper opening for direct ambient airflow. TIG-welded aluminum end tanks eliminate the brittle plastic crimps prone to separation on the Mk7 chassis, while reinforced black silicone hoses resist ballooning and thermal degradation. Heavy-duty stainless T-bolt clamps maintain a tight pressure seal across the EA888 Gen 3 2.0L TSI intake tract to stabilize charge density and airflow efficiency.
What's Included
- 1 x Silver Aluminum Twintercooler
- 3 x Black Silicone Hoses
- 6 x T-Bolt Clamps
- Small Fittings (as shown)
Technical Specifications
| Fitment | 2015-2017 Volkswagen Golf GTI,Golf R |
|---|---|
| Engine / Chassis | EA888 Gen 3 2.0L TSI / Mk7 (MQB) |
| Stock Engine Output | 210-220 hp / 258 lb-ft (GTI) | 292 hp / 280 lb-ft (Golf R) |
| Installation Type | Bolt-On (GTI) / Minor Grille Trimming (Golf R) |
| Replaces OEM Part # | 03CSJ031ABK |
Compatibility
- Volkswagen Golf GTI 2015-2017 2.0L (typically installs without modification)
- Volkswagen Golf R 2015-2017 2.0L (may require trimming or sanding on the back side of the lower center grille)
- Excludes vehicles equipped with an Adaptive Cruise Control (ACC) radar sensor
Frequently Asked Questions & Fitment Warnings
Does this fit the Mk7 Golf GTI,Golf R?
Yes. This is a direct fit for the 2015-2017 Volkswagen Golf GTI,Golf R equipped with the EA888 Gen 3 2.0L TSI engine. This kit will NOT fit vehicles equipped with an Adaptive Cruise Control (ACC) radar sensor, and Golf R models may require trimming or sanding on the back side of the lower center grille.
Will this resolve P0299 underboost codes and heat-soak timing pull?
Yes, when caused by a leaking or saturated OEM core. Upgrading to welded aluminum end tanks restores boost integrity on the Mk7 platform, though technicians should also inspect the diverter valve and OEM charge pipes if P0299 persists.
Are hoses and clamps included for installation?
Yes. All 3 black silicone hoses, 6 T-bolt clamps, and small mounting fittings are included; verify year, model, and ACC equipment before installing, and professional installation is recommended.
The Volkswagen Precision Standard
Engineered for thermal stability and ECU calibration accuracy on European turbocharged platforms, this twin-core assembly keeps intake temperatures within target thresholds for consistent, CEL-free operation. Verify vehicle options prior to installation for proper lower-grille clearance.
Ajustement
Ajustement
|
Faire |
Volkswagen |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$376.95