Intercooler for BMW 7 Series (2010-2012) 3.0L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
Bar-and-Plate Front-Mount Intercooler for 2010-2012 BMW 7 Series (F01)
What it Does: This performance front-mount intercooler cools pressurized intake air exiting the twin turbochargers on the 2010-2012 BMW 7 Series (F01) with the N54B30 3.0L engine before it enters the intake manifold.
The Stock BMW 7 Series Heat Soak Bottleneck
The factory tube-and-fin charge air cooler on the F01 chassis equipped with the twin-turbo N54B30 3.0L inline-six suffers from severe thermal saturation under sustained boost. Its crimped plastic end tanks and low-density core restrict charge-air velocity and develop hairline cracks at the seam seals after repeated heat cycles. As intake air temperatures climb, the DME pulls ignition timing and reduces boost targets to prevent detonation. Pressurized charge leaks frequently log P0299 underboost codes and BMW fault 30FF.
Common Symptoms of a Failing OEM Intercooler
- Check Engine Light / DTCs: Triggers P0299 (turbocharger underboost) or P0113 (intake air temperature circuit high) due to pressure loss and elevated IATs.
- Physical Boost Leak Signs: Oil residue weeping around crimped plastic end-tank seams or an audible hissing noise under heavy throttle.
- Drivability Impact: Noticeable power loss, sluggish throttle response after back-to-back acceleration, and DME-induced limp mode.
The All-Aluminum Bar-and-Plate Intercooler Solution
This front-mount intercooler replaces the restrictive 03CSI059ASL factory unit with an all-aluminum, TIG-welded bar-and-plate core engineered for rapid heat dissipation. High-density internal cooling fins and cast aluminum end tanks withstand elevated turbocharger boost pressures without seam separation or ballooning. Smooth internal flow geometry minimizes pressure drop across the core while lowering post-intercooler intake air temperatures during repeated pulls. Precision OEM-spec mounting tabs and charge-pipe couplers ensure a direct bolt-on fit behind the front bumper beam without cutting.
What's Included
- 1 x Front-Mount Intercooler
Technical Specifications
| Fitment | 2010-2012 BMW 7 Series |
|---|---|
| Engine / Chassis | N54B30 3.0L / F01 |
| Stock Engine Output | 315 hp / 330 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 03CSI059ASL |
Compatibility
- BMW 7 Series 740i (2010-2012) - 3.0L
Frequently Asked Questions & Fitment Warnings
Does this fit the F01 7 Series?
Yes. This is a direct fit for the 2010-2012 BMW 7 Series 740i equipped with the N54B30 3.0L engine. Excludes 4.4L V8 (750i/750Li) and 6.0L V12 (760Li) models; verify year, model, and engine before installing.
Will this resolve P0299 underboost codes caused by a cracked stock end tank?
Yes. Replacing a leaking 03CSI059ASL factory core eliminates boost pressure loss at the intercooler seams and stabilizes intake air temperatures, allowing the DME to hold target boost without triggering P0299.
Are installation instructions or extra charge pipes included?
No. This is an intercooler-only upgrade containing 1 x Intercooler without printed instructions; reuse factory mounting hardware and inspect O-rings and C-clips during professional installation.
The BMW Precision Standard
Engineered to meet the strict thermal and boost-control tolerances of the F01 DME, this intercooler maintains consistent charge-air density without triggering fault codes. Count on steady airflow efficiency and reliable ECU operation across daily commuting and spirited highway driving.
Ajustement
Ajustement
|
Faire |
BMW |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$363.95