Intake Manifolds for Audi A7 (2014-2015) 3.0L Left & Right

Direct-Replacement Intake Manifold Set for 2014-2015 Audi A7 (C7)

What it Does: The Intake Manifold Set replaces the warped lower intake runners and failed tumble flap mechanisms on the 2014-2015 Audi A7 to eliminate vacuum leaks and restore accurate manifold air-charge regulation.

The Stock Audi A7 Runner Flap Failure

On the C7 chassis equipped with the supercharged EA837 3.0 TFSI, the lower intake manifolds sit directly beneath the supercharger in the engine valley. Intense thermal cycling degrades the factory composite runner flap shafts, pivot bushings, and integrated actuator linkages over time. This wear causes runner flaps to bind or stick open/closed, triggering unmetered air leaks, poor idle stability, misfires, and persistent diagnostic trouble codes like P2004 or P2005.

The Engineering Solution

Constructed from premium aluminum and heat-stabilized composite materials, this left and right lower intake manifold bank is engineered to withstand high under-supercharger operating temperatures. Each manifold comes equipped with integrated runner flap actuators and new port seals to restore positive sealing at the cylinder head interface. By renewing both banks simultaneously, this set restores proper tumble control for optimal low-end torque, sharp throttle response, and zero unmetered air ingress.

What's Included

• 1 Left Lower Intake Manifold (with integrated runner flap actuator and port seals)
• 1 Right Lower Intake Manifold (with integrated runner flap actuator and port seals)

Technical Specifications

Compatibility

• 2014-2015 Audi A7 Quattro Premium Plus (3.0L Supercharged V6 Gas)
• 2014-2015 Audi A7 Quattro Prestige (3.0L Supercharged V6 Gas)

Frequently Asked Questions & Fitment Warnings

Does this fit the C7 A7?

Yes, this is a direct fit for the 2014-2015 Audi A7 equipped with the EA837 3.0L supercharged V6. Does not fit 3.0L TDI diesel, 2.0T, or 4.0T engines.

Are adaptation resets required after replacement?

Yes, because the supercharger must be unbolted to access these lower runners, you should install new supercharger gaskets and execute a flap adaptation relearn using a diagnostic tool like VCDS to clear stored trim codes.

The Audi Precision Standard

Engineered to match tight German tolerances, this manifold set restores factory airflow dynamics and intake runner flap position feedback, keeping your A7 running smooth and code-free across daily driving and wide-open throttle.