Hubcentric Wheel Spacer Kit for Lamborghini Gallardo (2008-2014) 15mm

Precision Hubcentric 15mm Wheel Spacer Kit for 2008-2014 Lamborghini Gallardo (Typ 140)

What it Does: The Hubcentric 15mm Wheel Spacer Kit widens the track width on the 2008-2014 Lamborghini Gallardo to correct sunken wheel offset and increase high-speed lateral cornering stability.

The Stock Lamborghini Gallardo Inset Wheel Track

Factory engineering on the Typ 140 Gallardo leaves significant clearance between the tire sidewall and the outer fender lip. This conservative OEM track width increases body roll leverage under hard lateral transitions and causes an inward-tucked stance that disrupts smooth underbody and fender airflow. Additionally, standard aftermarket universal spacers fail to center properly, leading to dangerous rotational shear forces on lug studs and severe high-speed wheel vibration.

The Engineering Solution

Engineered specifically for the 5.2L V10 Gallardo platform, this 15mm kit features an integrated hubcentric lip precisely matched to the 57.1mm factory hub snout and 5x112 PCD. Machined from high-tensile aircraft-grade billet alloy, it distributes rotational shear loads directly across the hub face rather than the fasteners. Complete with matched extended high-tensile steel wheel bolts, this kit widens the stance by 30mm per axle, significantly reducing lateral weight transfer while preserving factory wheel balance and bearing service life.

What's Included

• Hubcentric 15mm wheel spacer kit
• Extended length wheel fasteners

Technical Specifications

Compatibility

• 2008-2014 Lamborghini Gallardo Coupe
• 2008-2014 Lamborghini Gallardo Spyder
• 2008-2014 Lamborghini Gallardo Superleggera
• 2008-2014 Lamborghini Gallardo LP550-2
• 2008-2014 Lamborghini Gallardo LP560-4
• 2008-2014 Lamborghini Gallardo LP570-4 Superleggera / Performante

Frequently Asked Questions & Fitment Warnings

Does this fit the Typ 140 Gallardo?

Yes, this is a direct fit for the 2008-2014 Lamborghini Gallardo equipped with the 5.2L V10 engine. This kit does not fit Lamborghini Huracán, Aventador, or Urus models due to distinct hub bores and bolt pitch configurations.

What torque specification should be used for installation?

Fasteners must be torqued in a star pattern to the factory specification of 103 lb-ft (140 Nm) with clean, dry threads.

The Lamborghini Precision Standard

Manufactured to rigid European motorsport tolerances, this spacer system delivers exact hub registration to eliminate high-speed dynamic imbalances and protect factory wheel bearing longevity under extreme track loads.