Hubcentric Wheel Spacer Kit for Bentley Bentayga (2016-2024) 15mm

Track-Widening Hubcentric 15mm Wheel Spacer Kit for 2016-2024 Bentley Bentayga (4V)

What it Does: The Hubcentric 15mm Wheel Spacer Kit widens the axle track width on the 2016-2024 Bentley Bentayga to eliminate recessed wheel fitment, increase cornering track stability, and improve suspension and brake clearance.

The Stock Bentley Bentayga Stance and Wheel Offset Limitations

Factory wheel offsets on the 4V chassis Bentayga leave the OEM wheel setup positioned deep inside the broad fender arches. This excessive inward offset restricts space for aftermarket brake hardware and limits lateral track width. Installing universal, non-hubcentric spacers frequently introduces severe radial runout and high-speed steering wheel shudder because they fail to properly transfer shear forces directly to the factory center bore hub snout under high load.

The Engineering Solution

Engineered to handle the extreme curb weight and torque of the 4V platform, this spacer kit is CNC-machined from high-tensile 7075-T6 billet aluminum. Each spacer features a precision-machined hubcentric collar designed to seat perfectly over the factory 71.6mm hub pilot, maintaining precise wheel concentricity and zero rotational vibration. An advanced black hard-anodized surface finish seals the aluminum against galvanic corrosion and winter road salts when mating against steel wheel bearings and cast alloy wheels. Adding 15mm of offset per corner increases total axle track by 30mm, broadening the footprint for flatter cornering dynamics.

What's Included

• Hubcentric 15mm wheel spacer kit
• Fasteners per kit contents

Technical Specifications

Compatibility

• 2016-2024 Bentley Bentayga (All Powertrains, including V8, W12, and Hybrid)

Frequently Asked Questions & Fitment Warnings

Does this fit the 4V Bentayga?

Yes, this is a direct fit for the 2016-2024 Bentley Bentayga equipped with the EA825 engine. Verify bolt pattern, center hub bore, and brake clearance before installation.

What torque specification should be used during installation?

Torque all wheel fasteners in a star pattern to the factory Bentley specification of 118 lb-ft (160 Nm) using a calibrated manual torque wrench.

The Bentley Caliber

Manufactured to mirror exacting European luxury standards, these hubcentric spacers maintain factory steering precision, ensure uncompromised ride quality, and guarantee vibration-free high-speed performance across all road surfaces.