Passer au contenu du produit
1 sur 5

High Output Alternator for Toyota RAV4 (1996-2000) 2.0L



Prix normal $236.95
Prix promotionnel $236.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

150A High-Output Alternator for 1996-2000 Toyota RAV4 (XA10)

What it Does: This 150-amp, 12-volt alternator replaces the factory charging unit on 1996-2000 Toyota RAV4 (XA10) 3S-FE 2.0L models to power auxiliary lighting and audio loads.

The Stock Toyota RAV4 Charging Bottleneck

On the XA10 equipped with the 3S-FE 2.0L, the factory 80-amp alternator runs near its thermal limit under added electrical loads. Engine-bay heat soak accelerates diode rectifier burnout and regulator failure, while brush wear reduces slip-ring contact. When output drops at idle, battery reserve drains and triggers low-voltage DTCs such as P0562 and P0560.

Common Symptoms of a Failing OEM Alternator

  • Charging DTCs: Logs P0562 or P0560 when system voltage falls below ECM thresholds.
  • Idle Voltage Drop: Dimming lights and slow accessories caused by failing diode bridges or stator windings.
  • Hard Starting: Depleted battery cranking amps causing slow cranking and erratic ignition.

The High-Output 150A Alternator Solution

Manufactured in the USA as a brand-new assembly, this 150-amp, 12V alternator eliminates rebuilt-core reliability issues. It includes a new housing, pulley, internal voltage regulator, and high-output stator windings engineered for sustained electrical loads. Built to replace OEM units 13557, AL3261N, AL3261X, and 0-986-040-960, it bolts directly into factory mounts with OEM-style connector geometry.

What's Included

  • 1 Complete New 150-Amp Alternator (Housing, Pulley, Regulator, Windings)

Technical Specifications

Fitment 1996-2000 Toyota RAV4
Engine / Chassis 3S-FE 2.0L / XA10
Factory Electrical Output 80 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 13557, AL3261N, AL3261X, 0-986-040-960

Compatibility

  • 1996-2000 Toyota RAV4 2.0L (XA10 / 3S-FE)

Frequently Asked Questions & Fitment Warnings

Does this fit the XA10 RAV4?

Yes. This is a direct fit for the 1996-2000 Toyota RAV4 equipped with the 3S-FE 2.0L engine. Excludes hybrid powertrains, other displacements, and years outside 1996-2000; verify pulley and connector first.

Will this resolve P0562 voltage drops and support accessories?

Yes. Its 150-amp output resolves P0562 charging deficits and supports lights or audio; inspect belts, tensioners, and battery cables to prevent slip.

What installation steps are required for proper operation?

Disconnect the battery before installation. Reuse original spacers or dust covers only if compatible, torque bolts to factory spec, and verify charging voltage.

The Toyota Heavy-Duty Standard

Built for thermal endurance and consistent 12V output, this XA10 alternator supports demanding electrical loads. Rely on steady charging performance across daily driving and trail recovery.




Ajustement

Faire

Toyota

Cylindrée

  • 2.0L

Année

  • 1996
  • 1997
  • 1998
  • 1999
  • 2000

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

High Output Alternator for Toyota RAV4 (1996-2000) 2.0L

$236.95