High Output Alternator for Toyota 4Runner (2014-2022) 4.0L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
260-Amp High Output Alternator for 2014-2022 Toyota 4Runner (N280)
What it Does: This 260-amp, 12-volt high-output alternator replaces the factory unit on the N280 2014-2022 Toyota 4Runner with the 1GR-FE 4.0L V6 engine to supply increased charging current.
The Stock Toyota 4Runner Charging System Bottleneck
The factory 130-amp alternator (such as 27060-31190 or 104210-2860) on the N280 1GR-FE 4.0L V6 operates near maximum duty cycle when powering winches, off-road lighting, or audio amplifiers. Sustained engine-bay heat soak causes stator winding insulation breakdown and diode rectifier burnout under prolonged electrical demand. Once internal brushes wear or the voltage regulator fails, charging voltage drops at idle and the ECU triggers P0562 or P0620 fault codes.
Common Symptoms of a Failing OEM Alternator
- Check Engine / Battery Light: Triggers P0562 (System Voltage Low) or P0620 (Generator Control Circuit) when regulator output drops.
- Voltage Drop Under Load: Dimming headlights or battery drain at idle while operating auxiliary lighting or recovery gear.
- Bearing Whine or Hard Starts: Worn rotor bearings or shorted rectifier diodes causing mechanical noise and undercharged cranking.
The High-Output 260-Amp Alternator Solution
Built as a complete new unit rather than a rebuilt core, this 260-amp alternator integrates heavy-duty internal windings, a matched regulator, and a pre-installed overdrive pulley to maximize low-RPM output. The cast housing bolts directly onto the 1GR-FE 4.0L V6 engine and replaces 27060-31190, 27060-31260, and 104210-2860 using factory mounting geometry. Pairing installation with a heavier fused main charging cable ensures full amperage reaches the battery.
What's Included
- 1x Complete New 260-Amp Alternator (Assembled housing, overdrive pulley, regulator, and internal windings)
Technical Specifications
| Fitment | 2014-2022 Toyota 4Runner |
|---|---|
| Engine / Chassis | 1GR-FE 4.0L V6 / N280 |
| Factory Electrical Output | 130 Amps / 12V |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 104210-2860, 104210-2863, 104210-2864, 27060-31190, 104211-8602, 104211-8603, 27060-31260, 104210-2840, 27060-31180 |
Compatibility
- 2014-2022 Toyota 4Runner 4.0L (N280 Chassis, 1GR-FE Engine)
Frequently Asked Questions & Fitment Warnings
Does this fit the N280 4Runner?
Yes. This is a direct fit for the 2014-2022 Toyota 4Runner equipped with the 1GR-FE 4.0L V6 engine. Excludes hybrid powertrains, other displacements, and years outside 2014-2022; verify connector and pulley match before ordering.
Will this clear P0562 codes, and can I swap my OEM pulley onto this unit?
Yes, restoring charging voltage clears P0562/P0620 codes, and no, do not swap pulleys. Replacing the installed overdrive pulley reduces idle output; a slightly shorter drive belt may be required if squealing or slipping occurs.
What is required during installation?
Disconnect the battery, transfer original spacers or dust covers only if compatible, and torque bolts to factory spec. Use a heavier fused main charging cable for full 260-amp transfer and verify charging voltage with a meter.
The Toyota Heavy-Duty Standard
Built for N280 trail rigs and tow vehicles running winches and auxiliary lighting, this 260-amp unit delivers sustained thermal durability and stable charging voltage.
Ajustement
Ajustement
|
Faire |
Toyota |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$402.95