Passer au contenu du produit
1 sur 4

High Output Alternator for Ford Fusion (2013-2018) 2.0L 2.5L



Prix normal $349.95
Prix promotionnel $349.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

350-Amp High-Output Alternator for 2013-2018 Ford Fusion (CD391)

What it Does: This 350-amp, 12-volt alternator supplies high-capacity charging current for 2013-2018 Ford Fusion (CD391) 2.0L EcoBoost and 2.5L Duratec engines under heavy electrical loads.

The Stock Ford Fusion Charging Bottleneck

The factory alternator on the CD391 Fusion with the 2.0L EcoBoost or 2.5L Duratec engine uses lightweight stator windings and an internal regulator prone to under-hood heat soak. Heavy draws from auxiliary lights, audio gear, or aging batteries push the stock rectifier past thermal limits, causing diode burnout. This drops bus voltage, logging P0562 or P0620 fault codes and causing total charging failure.

Common Symptoms of a Failing OEM Alternator

  • Charging DTCs: Triggers P0562, P0620, or P0625 from failing regulator or rectifier circuits.
  • Voltage Drop: Dimming lights or readings below 13.5V at idle under load.
  • Starting Issues: Chronic battery drain, hard cold starts, and premature battery sulfation.

The High-Output Alternator Solution

Built in the USA as a brand-new assembly—not a rebuilt core—this 350-amp, 12-volt unit replaces OEM part numbers 10280, GL8671, and 11665. Its heavy-duty internal windings, upgraded rectifier diodes, pre-installed pulley, and regulator are assembled into one casting engineered to resist thermal stress. It bolts directly into factory mounts and plugs into the OEM harness without cutting or modification.

What's Included

  • 1 Complete 350-Amp Alternator (Housing, Pulley, Regulator, Windings)

Technical Specifications

Fitment 2013-2018 Ford Fusion
Engine / Chassis 2.0L EcoBoost, 2.5L Duratec / CD391
Factory Electrical Output 150-175 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 10280, GL8671, 11665

Compatibility

  • 2013-2018 Ford Fusion 2.0L
  • 2013-2018 Ford Fusion 2.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the CD391 Fusion?

Yes. Direct fit for 2013-2018 Ford Fusion 2.0L EcoBoost and 2.5L Duratec engines. Excludes Hybrid models, other displacements, and years outside 2013-2018; confirm pulley and connector first.

Will this resolve P0562 codes and power accessories?

Yes. Rated at 350 amps (output varies with RPM and load), it eliminates voltage sag from failing 10280, GL8671, or 11665 units while supporting audio, lights, and recovery gear.

What prep is required for installation?

Disconnect the battery first and verify belt, tensioner, and cable condition to prevent slip or voltage drop. Reuse required spacers/dust covers if applicable, torque bolts to spec, and test voltage.

The Ford Heavy-Duty Standard

Engineered for thermal durability and steady output under heavy accessory loads, this Made-in-USA unit prevents rectifier burnout on your CD391 Fusion with OEM bolt-on fitment.




Ajustement

Faire

Ford

Cylindrée

  • 2.0L
  • 2.5L

Année

  • 2013
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

High Output Alternator for Ford Fusion (2013-2018) 2.0L 2.5L

$349.95