Passer au contenu du produit
1 sur 4

High Output Alternator for Ford Focus (2008-2011) 2.0L



Prix normal $472.95
Prix promotionnel $472.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

300-Amp High-Output Alternator for 2008-2011 Ford Focus (C170)

What it Does: This 300-amp, 12-volt alternator replaces the OEM charging unit on the 2008-2011 Ford Focus (C170) 2.0L Duratec 20 to sustain heavy electrical loads.

The Stock Ford Focus Charging System Bottleneck

The factory 110-amp alternator (9R5T10300BB / A2TX1691) on the C170 chassis with the 2.0L Duratec 20 lacks reserve capacity under heavy accessory loads. Sustained engine-bay heat soak accelerates diode rectifier burnout and degrades stator winding copper insulation. Worn slip-ring brushes further restrict field current at idle. As system voltage drops, the PCM triggers charging faults like P0562, P0620, or P0622.

Common Symptoms of a Failing OEM Alternator

  • Charging DTCs: Stored P0562 (low voltage) or P0620 (generator control) codes illuminate the battery warning light.
  • Voltage Drop Under Load: Dimming headlights, slow blower fans, and sub-13.2V idle readings with accessories active.
  • Battery Drain & Noise: Repeated deep-discharge hard starts accompanied by bearing whine or burnt rectifier odor.

The High-Output Direct-Fit Alternator Solution

Built in the USA from all-new components—never a rebuilt core or used pull-off—this unit supplies a 300-amp, 12-volt rated charging capacity. Heavy-duty stator windings, an upgraded rectifier bridge, and an internal regulator come pre-assembled in a direct-fit housing with pulley. It bolts to the 2.0L Duratec 20 mounts and plugs into the OE harness. Actual output scales with engine RPM and load.

What's Included

  • 1 Complete 300-Amp High-Output Alternator (housing, pulley, regulator, windings assembled)

Technical Specifications

Fitment 2008-2011 Ford Focus
Engine / Chassis 2.0L Duratec 20 / C170
Factory Electrical Output 110 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11272, GL990, 11542, 9R5T10300BB, A2TX1691

Compatibility

  • 2008-2011 Ford Focus 2.0L (Excludes hybrid powertrains and other engine displacements)

Frequently Asked Questions & Fitment Warnings

Does this fit the C170 Focus?

Yes. Direct fit for the 2008-2011 Ford Focus 2.0L Duratec 20. Excludes hybrid powertrains, other displacements, and non-listed years; verify your pulley and connector before ordering.

Will this clear P0562 or P0620 voltage codes?

Yes, if the OE unit failed. Replacing a worn 11272, 11542, or GL990 restores voltage; inspect the belt, tensioner, and battery cables to prevent idle drop.

Are spacers or mounting bolts included for installation?

No, it ships as one assembled unit. Disconnect the battery, transfer applicable spacers or dust covers, torque bolts to spec, and meter-check charging voltage.

The Ford Precision Standard

Built for stable 12-volt regulation, this US-made alternator keeps the C170 Focus PCM and electrical accessories powered reliably and CEL-free.




Ajustement

Faire

Ford

Cylindrée

  • 2.0L

Année

  • 2008
  • 2009
  • 2010
  • 2011

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

High Output Alternator for Ford Focus (2008-2011) 2.0L

$472.95