Passer au contenu du produit
1 sur 4

High Output Alternator for Ford Escape (2009-2012) 2.5L



Prix normal $472.95
Prix promotionnel $472.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

High-Output Alternator for 2009-2012 Ford Escape (CD2)

What it Does: This 300-amp, 12-volt alternator replaces the OEM unit on the 2009-2012 Ford Escape (CD2) Duratec 25 2.5L to power heavy electrical loads.

The Stock Ford Escape Charging Bottleneck

The factory 150-amp unit on the CD2 chassis with the Duratec 25 2.5L frequently suffers diode rectifier burnout and stator insulation failure from under-hood heat soak. Auxiliary lights, audio, and recovery gear force the regulator to run at maximum duty cycle, accelerating brush wear. Internal resistance spikes drop idle voltage, triggering PCM codes like P0562 or P0620 and leaving batteries severely discharged.

Common Symptoms of a Failing OEM Alternator

  • Check Engine Light / DTCs: Battery light with P0562 (low system voltage) or P0620 (generator control circuit) faults.
  • Voltage Drop Under Load: Dimming lights and erratic electronics at idle from burnt rectifier diodes.
  • Bearing Whine & Slip: Mechanical squeal from dry bearings or belt slip under electrical load.

The High-Output 300A Alternator Solution

Built in the USA from all-new components—never a rebuilt core—this 300-amp, 12-volt unit upgrades the CD2 charging system without custom brackets. Heavy-duty copper windings, high-temp diodes, and an internal regulator maintain output under continuous accessory draw. Its housing, pulley, and OEM connector bolt directly in place of 9R5T10300BB and A2TX1691, requiring sound belts, tensioners, and battery cables.

What's Included

  • 1 Complete 300-Amp Alternator (Housing, Pulley, Regulator, Internal Windings)

Technical Specifications

Fitment 2009-2012 Ford Escape
Engine / Chassis Duratec 25 2.5L I4 / CD2
Factory Electrical Output 150 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11272, GL990, 11542, 9R5T10300BB, A2TX1691

Compatibility

  • 2009-2012 Ford Escape 2.5L (Non-Hybrid Models Only)

Frequently Asked Questions & Fitment Warnings

Does this fit the CD2 Escape?

Yes. Fits 2009-2012 Ford Escape models with the Duratec 25 2.5L engine. Excludes hybrid powertrains, other displacements, and outside years; match your pulley and connector first.

Will this clear P0562 codes, and is it a rebuilt unit?

Yes, it resolves alternator-caused P0562 faults, and no, it is 100% new. Built in the USA with new internals to replace 11272 and GL990.

What is required during installation?

Disconnect the battery and inspect drive components. Torque bolts to factory spec, reuse applicable spacers, and verify healthy belts, tensioners, and cables to prevent voltage drop.

The Ford Heavy-Duty Standard

Built for utility crossovers running heavy accessories, this USA-made 300-amp alternator delivers sustained thermal and electrical durability. Confirm charging voltage at the battery post-installation.




Ajustement

Faire

Ford

Cylindrée

  • 2.5L

Année

  • 2009
  • 2010
  • 2011
  • 2012

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

High Output Alternator for Ford Escape (2009-2012) 2.5L

$472.95