Passer au contenu du produit
1 sur 5

High Output Alternator for Acura Integra (1992-1993) 1.7L 1.8L



Prix normal $236.95
Prix promotionnel $236.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

High-Output 130-Amp Alternator for 1992-1993 Acura Integra (DA9 / DB1 / DB2)

What it Does: This new 130-amp, 12V alternator replaces the OEM unit on 1992-1993 Acura Integra (DA9, DB1, DB2) B17A1/B18A1 engines to power heavy electrical loads.

The Stock Acura Integra Charging Bottleneck

Factory 70-amp units (31100-PR4-C01, 100211-5350) on the DA9, DB1, and DB2 chassis with B17A1 or B18A1 engines run near thermal limits under auxiliary loads. Sustained under-hood heat soak degrades stator insulation and burns out the diode rectifier bridge or internal voltage regulator. As slip rings wear and output drops below 13.5V, the battery drains at idle and can trigger an Electronic Load Detector (ELD Code 20) fault.

Common Symptoms of a Failing OEM Alternator

  • Battery Light & ELD Faults: Charge light or Code 20 from diode rectifier failure.
  • Voltage Drop Under Load: Dimming lights and low idle voltage with fans active.
  • Slow Cranking & Whine: Discharged battery causing hard starts, or worn rotor bearings.

The High-Output 130-Amp Alternator Solution

Built in the USA as a brand-new assembly—never a rebuilt core—this 130-amp, 12V alternator bolts directly onto B17A1 and B18A1 mounts without modification. Its housing, pulley, internal regulator, and stator windings arrive pre-assembled to replace 100211-8910 and 100211-8911 units cleanly. Increased copper fill and upgraded rectification sustain higher output across engine speeds, preventing battery drain with auxiliary lighting, audio, or recovery gear.

What's Included

  • 1x Complete New 130-Amp Alternator (housing, pulley, regulator, windings)

Technical Specifications

Fitment 1992-1993 Acura Integra
Engine / Chassis 1.7L B17A1, 1.8L B18A1 / DA9, DB1, DB2
Factory Electrical Output 70 Amps / 12V
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 13433, 13433-130A, 13433N, 100211-5350, 100211-8910, 100211-8911, 334-1149, 31100-PR4-C01, AL1271X, 210-0214

Compatibility

  • 1993 Acura Integra 1.7L (DB2 / B17A1)
  • 1992-1993 Acura Integra 1.8L (DA9, DB1 / B18A1)

Frequently Asked Questions & Fitment Warnings

Does this fit the DA9, DB1, and DB2 Integra?

Yes. Fits 1992-1993 Integra 1.8L B18A1 and 1993 1.7L B17A1. Excludes hybrids, other displacements, and years outside 1992-1993.

Will this resolve voltage drop and ELD charging faults?

Yes, with sound wiring. Inspect belts, tensioner, and cables, as 130A output exposes weak grounds.

What prep is required during alternator installation?

Disconnect the battery and verify pulley/connector match. Transfer required spacers/covers, torque mounting bolts to spec, and meter-test voltage.

The Acura Precision Standard

Built for B-series bays, this USA-made unit holds steady voltage under thermal load for crisp throttle response.




Ajustement

Faire

Acura

Cylindrée

  • 1,7 L
  • 1,8 L

Année

  • 1992
  • 1993

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

High Output Alternator for Acura Integra (1992-1993) 1.7L 1.8L

$236.95