Passer au contenu du produit
1 sur 6

Drive Belt Tensioner Kit for BMW X6 (2008-2019) 3.0L



Prix normal $180.95
Prix promotionnel $180.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Drive Belt Tensioner Kit for 2008-2019 BMW X6 (E71/F16)

What it Does: This drive belt tensioner kit restores accessory belt tension and pulley alignment on 2008-2019 BMW X6 E71/F16 3.0L I6 models.

The Stock BMW X6 Tensioner and Pulley Failure

Under sustained heat soak on E71 and F16 platforms, factory tensioner springs fatigue and pivot bushings wear unevenly on N54 and N55 3.0L engines. Sealed idler pulley bearings simultaneously lose lubrication, introducing rotational drag and pulley misalignment. Left unaddressed, belt glazing or tracking failure triggers charging fault P0562 and risks belt throw. Replacing every wear item together prevents repeat teardown labor.

Common Symptoms of a Failing OEM Tensioner & Pulley Assembly

  • Charging Faults: Belt slip triggers battery warnings and P0562 low-voltage codes.
  • Pulley Noise: Dry idler bearings and weak springs cause startup squeal or chirping.
  • Belt Wear: Misaligned pulleys fray belt ribs, risking complete belt throw.

The Direct-Fit Serpentine Drive Solution

This front-accessory service kit replaces the tensioner, both idler pulleys, and drive belt together to eliminate mismatched component wear. High-temperature sealed bearings and calibrated tensioner spring geometry maintain consistent belt wrap on N54 and N55 applications. Built to match OEM parts 11288673720, 11288604266, 11287628659, 11287615130, and 11287615130-9, components bolt directly into factory locations. Torquing fasteners to specification and verifying rib seating ensures slip-free accessory drive.

What's Included

  • 1 Drive Belt Tensioner
  • 2 Idler Pulleys
  • 1 Drive Belt

Technical Specifications

Fitment 2008-2019 BMW X6
Engine / Chassis 3.0L I6 (N54/N55) / E71, F16
Stock Engine Output 300 hp / 300 lb-ft
Installation Type Direct Bolt-On OEM Replacement
Replaces OEM Part # 11288673720, 11288604266, 11287628659, 11287615130, 11287615130-9

Compatibility

  • 2008-2019 BMW X6 — 3.0L Gas Turbocharged

Frequently Asked Questions & Fitment Warnings

Does this fit the E71/F16 X6?

Yes. Direct fit for 2008-2019 BMW X6 3.0L I6 (N54/N55) models. Excludes 2.0L four-cylinder and 4.4L V8 engines.

Are water pump or fan parts included?

No. Includes two idler pulleys, one tensioner, and one drive belt only; water pump, fan, and timing-chain parts are excluded.

How is the kit installed?

Direct bolt-on service. Relieve tension, install all new components in factory routing, torque fasteners to spec, and verify groove seating.

The BMW Precision Standard

Restores E71/F16 charging stability and quiet front-accessory drive operation free of P0562 faults. Confirm 3.0L engine fitment before ordering.




Ajustement

Faire

BMW

Cylindrée

  • 3.0L

Année

  • 2008
  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018
  • 2019

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Drive Belt Tensioner Kit for BMW X6 (2008-2019) 3.0L

$180.95