Passer au contenu du produit
1 sur 6

Drive Belt Tensioner Kit for BMW 5 Series (2009-2017) 3.0L



Prix normal $180.95
Prix promotionnel $180.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Drive Belt Tensioner Kit for 2009-2017 BMW 5 Series (E60 / F10)

What it Does: Restores accessory belt tension and pulley alignment on 2009-2017 BMW 5 Series (E60 / F10) N54 / N55 3.0L engines to drive the alternator reliably.

The Stock BMW 5 Series Accessory Drive Failure

Engine-bay heat soak on the E60 / F10 chassis with the N54 / N55 3.0L fatigues the tensioner spring while sealed idler bearings lose grease and seize. As the drive belt glazes and cracks, lost tension causes alternator pulley slip, risking belt ejection or P0562 low-voltage codes. Replacing only the belt leaves worn bearings behind to trigger repeat failure.

Common Symptoms of a Failing OEM Tensioner Kit

  • Charging Warnings / DTCs: Alternator belt slip triggers low-voltage codes like P0562.
  • Audible Squeal or Chirp: Seized pulley bearings cause cold-start squealing and grinding.
  • Belt Wear or Separation: Misaligned pulleys shred ribs or throw the belt.

The Direct-Fit Accessory Drive Solution

Built to factory N54 / N55 3.0L geometry, this kit replaces OEM numbers 11288673720, 11288604266, 11287628659, 11287615130, and 11287615130-9. The calibrated tensioner maintains uniform belt load across all RPMs, while two sealed-bearing idler pulleys eliminate wobble and drag. Together with the multi-ribbed drive belt, every part bolts into factory locations with zero modification.

What's Included

  • 1 Drive Belt Tensioner
  • 2 Idler Pulleys
  • 1 Drive Belt

Technical Specifications

Fitment 2009-2017 BMW 5 Series
Engine / Chassis N54 / N55 3.0L / E60 / F10
Stock Engine Output 300 hp / 300 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11288673720, 11288604266, 11287628659, 11287615130, 11287615130-9

Compatibility

  • 2009-2017 BMW 5 Series — 3.0L Gas Turbocharged

Frequently Asked Questions & Fitment Warnings

Does this fit the E60 / F10 5 Series?

Yes. Direct fit for 2009-2017 BMW 5 Series with the N54 / N55 3.0L engine. Excludes 2.0L four-cylinder and 4.4L V8 models; verify engine size before ordering.

Are all pulleys and a water pump included?

Two idler pulleys, one tensioner, and one belt are included; water pump excluded. Fan and timing-chain parts are not included, and replacing all four stops P0562 slip faults.

Is installation difficult for this belt kit?

No, it is a standard front-accessory service. Relieve tension, swap the worn parts, follow factory routing, torque fasteners to spec, and confirm groove seating.

The BMW Precision Standard

Stable drive speed on the E60 / F10 protects charging voltage for BMW ECU and emissions monitors. Replacing the full assembly ensures fault-free operation.




Ajustement

Faire

BMW

Cylindrée

  • 3.0L

Année

  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016
  • 2017

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Drive Belt Tensioner Kit for BMW 5 Series (2009-2017) 3.0L

$180.95