Catalytic Converter for Ford Edge Explorer Taurus (2012-2017) 2.0L

Direct-Fit Stainless Catalytic Converter for 2012-2017 Ford Edge, Explorer & Taurus (U387 / U502 / D258)

What it Does: This direct-fit catalytic converter bolts behind the turbocharger on 2012-2017 Ford Edge, Explorer, and Taurus 2.0L EcoBoost I4 models to restore exhaust flow and emissions conversion.

The Stock Ford Edge, Explorer & Taurus Converter Failure

Mounted directly at the turbocharger outlet, the factory converter on the U387 Edge, U502 Explorer, and D258 Taurus endures extreme exhaust gas temperatures from the 2.0L EcoBoost I4. Repeated heat soak and rich fuel spikes fracture the OEM ceramic substrate and degrade its precious-metal washcoat. Once the internal brick breaks apart, loose chunks rattle inside the shell and restrict exhaust flow, spiking backpressure and triggering P0420 or P0430 catalyst efficiency faults.

Common Symptoms of a Failing OEM Catalytic Converter

• Catalyst Efficiency DTCs: Stores P0420 or P0430 when post-cat O2 readings mirror pre-cat waveforms.
• Substrate Rattle: Metallic buzzing beneath the engine bay caused by a fractured ceramic core.
• Exhaust Restriction: Sluggish turbo spool, high backpressure, and failed OBD-II emissions testing.

The Direct-Fit Stainless Catalytic Converter Solution

Engineered as an exact bolt-on replacement (Part # EXL33097), this converter pairs a corrosion-resistant stainless steel body with an 8-inch by 5-inch ceramic honeycomb substrate. Factory-spec turbo-side flanges, brackets, and dual pre- and post-catalyst oxygen sensor bungs ensure leak-free alignment without cutting or welding. Its free-flowing honeycomb geometry restores turbo exhaust scavenging, eliminates internal rattles, and satisfies OBD-II monitors under EPA federal emissions standards.

What's Included

• 1 x Direct-Fit Catalytic Converter (Part # EXL33097)
• 1 x Ring Seal
• 1 x 2-Bolt Flange Gasket

Technical Specifications

Compatibility

• 2012-2014 Ford Edge (U387): SE, SEL, Limited — 2.0L EcoBoost I4 only (Excludes 2015-2018 2.0L Edge & 3.5L/3.7L V6)
• 2012-2015 Ford Explorer (U502): Base, XLT, Limited — 2.0L EcoBoost I4 only (Excludes 2016+ 2.3L Explorer & 3.5L V6)
• 2013-2017 Ford Taurus (D258): SE, SEL, Limited — 2.0L EcoBoost I4 only (Excludes 3.5L V6)

Frequently Asked Questions & Fitment Warnings

Does this fit the U387 Edge, U502 Explorer, or D258 Taurus?

Yes. Fits 2012-2014 Edge, 2012-2015 Explorer, and 2013-2017 Taurus models equipped with the 2.0L EcoBoost I4 engine. Excludes 2015-2018 Edge 2.0L, 2016+ Explorer 2.3L, and all 3.5L/3.7L V6s; not CARB approved for CA, NY, CO, or ME.

Will this clear P0420/P0430 codes, and are O2 sensors included?

Yes, for worn converters; O2 sensors are not included. Transfer or replace both sensors and check for upstream exhaust leaks to clear P0420 and P0430 codes.

Are gaskets included, and what is required for installation?

Yes, a ring seal and 2-bolt flange gasket are included. Soak old fasteners with penetrating oil once cool, torque evenly, and inspect every joint for leaks upon startup.

The Ford Precision Standard

Engineered for daily-driven 2.0L EcoBoost I4 platforms, this stainless converter restores OBD-II emissions precision and CEL-free operation with reliable thermal durability.