Passer au contenu du produit
1 sur 2

5 Inch Exhaust System for Dodge Ram 2500 3500 (2004-2007) 5.9L



Prix normal $1,039.95
Prix promotionnel $1,039.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Heavy-Duty 5-Inch Exhaust System for 2004-2007 Dodge Ram 2500,Ram 3500 (DR/DH)

What it Does: Replaces corroded, restrictive factory piping on 2004-2007 Dodge Ram 2500/3500 DR/DH trucks with the ISB 5.9L Cummins to restore unobstructed exhaust flow.

The Stock Dodge Ram 2500,Ram 3500 Exhaust Failure

Factory exhaust tubing on the DR/DH chassis suffers from severe thermal cycling and road-salt corrosion, causing thin-wall seams to rust through. Compromised joints leak hot exhaust and soot beneath the bed, while crushed factory bends restrict turbine exit flow on the ISB 5.9L. This elevated backpressure spikes exhaust gas temperatures and can trigger sluggish turbo spool or P0299 underboost symptoms under heavy towing loads.

Common Symptoms of a Failing OEM Exhaust

  • Soot Streaks: Carbon tracking at clamps or hangers indicating breached joints leaking exhaust fumes.
  • Exhaust Rattle: Rising cab drone or rattling over bumps from thinned, rusted-out pipe sections.
  • Turbo Lag & Codes: Restricted exit flow raising EGTs and risking P0299 underboost faults.

The 5-Inch Stainless Exhaust Solution

Built from corrosion-resistant stainless steel, this 5-inch system replaces leak-prone OEM piping on DR/DH pickup applications. Both the inlet and angled rear outlet measure 5 inches, maintaining a continuous, heat-resistant exhaust path back to the tailpipe. Supplied as a clamp-on kit, it includes matched pipe sections, clamps, and hangers designed to restore clean turbocharger exit flow without factory-style slip-joint weaknesses.

What's Included

  • (1) 5-inch stainless steel exhaust pipe section set
  • Clamps
  • Hangers and mounting hardware (as pictured)

Technical Specifications

Fitment 2004-2007 Dodge Ram 2500,Ram 3500
Engine / Chassis ISB 5.9L Cummins / DR/DH
Emissions & Substrate Stainless Steel / 5-Inch Diameter, Angled Rear Outlet
Installation Type Clamp-On Replacement (Cab/Wheelbase Adjustment May Apply)
Replaces OEM Part # 511015, DD-511015

Compatibility

  • Dodge Ram 2500 (2004-2007) — 5.9L Cummins
  • Dodge Ram 3500 (2004-2007) — 5.9L Cummins

Frequently Asked Questions & Fitment Warnings

Does this fit the DR/DH Ram 2500,Ram 3500?

Yes. Fits 2004-2007 Dodge Ram 2500,Ram 3500 with the ISB 5.9L engine. Excludes 6.7L models, Chassis-Cab (C&C), and Ram 1500.

Must factory emissions equipment remain installed?

Yes. Required OEM emissions-control equipment must remain installed and operational on ISB 5.9L trucks.

Are mounting hardware and instructions included?

Hardware is included; instructions are not. Verify wheelbase first, and recheck 5-inch clamps after one heat cycle.

The Dodge Heavy-Duty Standard

Engineered for sustained towing temperatures and winter road salt, this 5-inch stainless system keeps your ISB 5.9L exhaust path sealed, durable, and free of corrosion-induced flow restrictions.




Ajustement

Faire

Dodge

Cylindrée

  • 5.9L

Année

  • 2004
  • 2005
  • 2006
  • 2007

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

5 Inch Exhaust System for Dodge Ram 2500 3500 (2004-2007) 5.9L

$1,039.95