Passer au contenu du produit
1 sur 2

4 Inch Exhaust System for GMC Sierra (2001-2007) 6.6L



Prix normal $974.95
Prix promotionnel $974.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

4-Inch Stainless Exhaust System for 2001-2007 GMC Sierra (GMT800)

What it Does: This 4-inch stainless steel exhaust system replaces rusted or dented factory piping to restore a continuous rear-outlet exhaust path on 2001-2007 GMC Sierra (GMT800) 6.6L Duramax trucks.

The Stock GMC Sierra Exhaust Failure

Factory mild-steel piping on GMT800 trucks equipped with the 6.6L Duramax (LB7/LLY/LBZ) endures severe thermal cycling and road-salt corrosion. Over time, OEM weld seams rust through, hangers snap causing pipe sag, and loose clamps leak black diesel soot. Dents from trailer hitches or off-road impacts further crimp tubing, spiking backpressure and exhaust temperatures that contribute to P0471 exhaust pressure or P0299 turbo underboost faults.

Common Symptoms of a Failing OEM Exhaust

  • Pressure & Boost Faults (P0471 / P0299): Crushed piping elevates backpressure, triggering P0471 or P0299 codes.
  • Soot Leaks & Pipe Sag: Broken hangers and loose clamps leak soot and rattle against the frame.
  • Rust-Through: Corroded pipe walls leak raw exhaust fumes beneath the cab.

The Stainless Steel 4-Inch Exhaust Solution

Replacing interchange part 431112, this 4-inch stainless steel exhaust system restores a continuous rear-outlet path on 6.6L Duramax trucks. Corrosion-resistant stainless tubing outperforms mild OEM steel, while new clamps and hangers seal soot leaks and maintain frame clearance. Built as a clamp-on replacement, it preserves proper flow geometry while keeping all required emissions-control equipment intact and fully operational under heavy diesel load.

What's Included

  • (1) 4-inch exhaust pipe section set (rear outlet)
  • Clamps
  • Hangers and mounting hardware (as pictured)

Technical Specifications

Fitment 2001-2007 GMC Sierra
Engine / Chassis 6.6L Duramax (LB7/LLY/LBZ) / GMT800
Emissions & Substrate Stainless Steel / 4-Inch Clamp-On Rear Outlet
Installation Type Clamp-On Replacement (Cab/Bed/Wheelbase Adjustment May Be Required)
Replaces OEM Part # 431112

Compatibility

  • 2001-2007 GMC Sierra 2500 (6.6L Duramax Diesel)
  • 2001-2007 GMC Sierra 3500 (6.6L Duramax Diesel)
  • Excludes 6.0L and 8.1L gas Sierra models and Chevrolet Silverado trucks (listed separately)

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT800 Sierra?

Yes. This is a direct fit for the 2001-2007 GMC Sierra 2500 and 3500 equipped with the 6.6L Duramax engine. Excludes 6.0L and 8.1L gas trucks and Chevrolet Silverado models; required emissions equipment must remain installed and operational.

Will this resolve P0471/P0299 restriction issues, and is a 5-inch kit available?

Yes. Replacing crushed or leaking tubing eliminates flow restrictions tied to P0471 or P0299; a 5-inch system for the same years is listed separately.

Are clamps and hangers included, and is adjustment required?

Yes. Clamps and hangers are included without instructions; verify inlet, hanger locations, and wheelbase before clamping, and recheck all joints after the first heat cycle.

The GMC Heavy-Duty Standard

A sealed 4-inch stainless path controls EGTs and stops soot leaks during heavy towing on GMT800 diesels. Built for thermal durability, it delivers reliable work-truck service.




Ajustement

Faire

GMC

Cylindrée

  • 6.6L

Année

  • 2001
  • 2002
  • 2003
  • 2004
  • 2005
  • 2006
  • 2007

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

4 Inch Exhaust System for GMC Sierra (2001-2007) 6.6L

$974.95