Passer au contenu du produit
1 sur 2

4 Inch Exhaust System for Chevrolet Silverado (2001-2007) 6.6L



Prix normal $974.95
Prix promotionnel $974.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

4-Inch Stainless Exhaust System for 2001-2007 Chevrolet Silverado (GMT800)

What it Does: This 4-inch stainless steel clamp-on exhaust system replaces corroded, leaking, or crushed factory exhaust tubing on 2001-2007 Chevrolet Silverado GMT800 2500 and 3500 trucks equipped with the 6.6L Duramax (LB7/LLY/LBZ) diesel engine to restore a clean rear exhaust exit path.

The Stock Chevrolet Silverado Exhaust Corrosion & Flow Restriction

Under heavy towing and road salt exposure, the factory exhaust on the GMT800 platform with the 6.6L Duramax (LB7/LLY/LBZ) suffers severe thermal cycling and internal condensation. Mild factory steel eventually develops rust pinholes, failed slip-joint seals, and rattling or collapsed hangers, while hitch or trail strikes deform tubing geometry. Exhaust leaks deposit soot under the chassis, and crushed pipe sections elevate exhaust backpressure and EGTs, hurting turbo spool and potentially contributing to P0299 underboost conditions.

Common Symptoms of a Failing OEM Exhaust System

  • Boost & Backpressure Faults (DTCs): Crushed or restricted tubing increases backpressure and EGTs, which can aggravate P0299 underboost or P0046 VGT vane control issues under load.
  • Physical & Audible Deterioration: Rusted pipe walls, collapsed or rattling hangers, and heavy black diesel soot accumulation around loose slip joints.
  • Drivability & Emissions Impact: Cab exhaust odor, elevated in-cab drone, and failed safety inspections caused by structural pipe damage or missing mounting support.

The 4-Inch Stainless Exhaust Solution

Constructed from corrosion-resistant stainless steel, this 4-inch exhaust system replaces deteriorated OEM tubing with a full-length, rear-outlet path engineered for GMT800 diesel trucks. The clamp-on multi-section layout pairs supplied exhaust clamps with matched hangers to stabilize the exhaust path and prevent soot blow-by at joints without permanent welding. Replacing interchange reference 431112, its consistent 4-inch internal geometry maintains steady exhaust gas velocity while keeping all factory emissions-control equipment intact and operational.

What's Included

  • (1) 4-inch stainless steel exhaust pipe section set (rear outlet configuration)
  • Exhaust clamps
  • Hangers and mounting hardware (as pictured)

Technical Specifications

Fitment 2001-2007 Chevrolet Silverado (2500 / 3500)
Engine / Chassis 6.6L Duramax (LB7/LLY/LBZ) / GMT800
Emissions & Substrate Stainless Steel / 4-Inch Rear Outlet (Retains OEM Emissions)
Installation Type Clamp-On Replacement (Cab/Bed/Wheelbase Adjustment May Be Required)
Replaces OEM Part # 431112

Compatibility

  • 2001-2007 Chevrolet Silverado 2500 / 2500HD (6.6L Duramax Diesel)
  • 2001-2007 Chevrolet Silverado 3500 (6.6L Duramax Diesel)
  • Excludes 6.0L and 8.1L gas Silverado models; GMC Sierra 4-inch system sold separately

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT800 Silverado?

Yes. This is a vehicle-specific fit for the 2001-2007 Chevrolet Silverado 2500 and 3500 equipped with the 6.6L Duramax (LB7/LLY/LBZ) diesel engine. Excludes 6.0L and 8.1L gas Silverado models and GMC Sierra trucks (listed separately); required factory emissions-control equipment must remain installed and operational.

Should I verify wheelbase and hanger layout, and will this clear P0299 or backpressure issues?

Yes. Compare inlet orientation, hanger locations, and cab/bed wheelbase against your removed system before tightening, as minor adjustment may be required. Replacing a crushed or leaking pipe restores normal exhaust flow to help resolve backpressure-related P0299 issues, provided turbo and sensor hardware are healthy.

Are clamps, hangers, and instructions included for installation?

Clamps, hangers, and mounting hardware are included, though printed instructions are not. Professional installation is recommended; once clamped and mounted, start the engine to inspect every joint for leaks and recheck hangers and clamps after the first heat cycle.

The Chevrolet Heavy-Duty Standard

Engineered for GMT800 diesel trucks subjected to heavy towing, payload hauling, and harsh road environments, this 4-inch stainless system restores structural exhaust integrity and thermal durability. Built around interchange 431112, it delivers clean rear-exit routing and dependable hanger support for long-term service.




Ajustement

Faire

Chevrolet

Cylindrée

  • 6.6L

Année

  • 2001
  • 2002
  • 2003
  • 2004
  • 2005
  • 2006
  • 2007

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

4 Inch Exhaust System for Chevrolet Silverado (2001-2007) 6.6L

$974.95