Saltar al contenido del producto
1 de 6

Valve Cover Gasket Set for Land Rover LR4 (2010-2013) 5.0L



Precio regular $50.95
Precio de oferta $50.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Valve Cover Gasket Set for 2010-2013 Land Rover LR4 (L319)

What it Does: This rubber valve cover gasket set seals both cylinder head covers on the 2010-2013 Land Rover LR4 (L319) AJ133 5.0L V8 to stop top-end oil leaks.

The Stock Land Rover LR4 Seal Failure

Under sustained heat soak on the L319 chassis, factory elastomer gaskets on the AJ133 5.0L V8 (508PN) harden, flatten, and lose elasticity. As the perimeter and internal seals crack, oil weeps onto hot exhaust manifolds and pools in spark-plug wells. Oil intrusion degrades ignition boots, while unsealed covers compromise crankcase vacuum. These leaks trigger misfire and lean fault codes including P0300, P0171, and P0174.

Common Symptoms of a Failing OEM Gasket Set

  • Check Engine Light / DTCs: Codes P0300 or P0171/P0174 from oil-fouled plug wells or vacuum leaks.
  • Burning Oil Smell: Oil dripping onto exhaust manifolds creates smoke and cabin odors.
  • Low Oil Level: Persistent top-end seepage around both covers lowers engine oil volume.

The Molded Elastomer Gasket Set Solution

Molded from heat-resistant rubber, this direct-fit set restores factory clamping pressure across both left and right cylinder banks. Replacing both main cover gaskets alongside all eight smaller rubber seals in one service prevents repeat leaks from aging seals. Each gasket matches OEM groove geometry for LR010789, LR010882, LR011220, and LR014345 without cutting. Properly torqued in sequence, it restores clean top-end sealing.

What's Included

  • 2 Valve Cover Gaskets (Left & Right)
  • 8 Smaller Rubber Gaskets

Technical Specifications

Fitment 2010-2013 Land Rover LR4
Engine / Chassis AJ133 5.0L V8 (508PN) / L319
Stock Engine Output 375 hp / 375 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # LR010789, LR010882, LR011220, LR014345, ROV0087, ROV0087G

Compatibility

  • 2010-2013 Land Rover LR4 — 5.0L Gas Naturally Aspirated

Frequently Asked Questions & Fitment Warnings

Does this fit the L319 LR4?

Yes. Direct fit for the 2010-2013 Land Rover LR4 AJ133 5.0L V8. Excludes 3.0L engines.

Will this clear P0300 codes, and are valve covers included?

It stops oil-well misfires, but covers are excluded. Sealing spark-plug wells prevents P0300 fouling; valve covers, PCV membranes, and spark plugs are not included.

Are both sides included, and what prep is needed?

Yes, two valve cover gaskets and eight smaller seals are included. Clean mating surfaces and torque fasteners to factory sequence.

The Land Rover Precision Standard

Built to OEM tolerances for the L319 platform, this gasket set maintains crankcase vacuum for ECU precision and CEL-free operation. Protect ignition components and eliminate top-end leaks.




Mueble

Hacer

Land Rover

Tamaño del motor

  • 5.0L

Año

  • 2010
  • 2011
  • 2012
  • 2013

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Valve Cover Gasket Set for Land Rover LR4 (2010-2013) 5.0L

$50.95