Saltar al contenido del producto
1 de 3

Turbo Intake Elbow for GMC Sierra (2011-2016) 6.6L



Precio regular $161.95
Precio de oferta $161.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

High-Flow 3.5-Inch Turbo Intake Elbow for 2011-2016 GMC Sierra (GMT900 / K2XX)

What it Does: This 3.5-inch welded turbo intake elbow routes filtered charge air into the compressor housing on 2011-2016 GMC Sierra LML 6.6L Duramax trucks.

The Stock GMC Sierra Turbo Inlet Restriction

On GMT900 / K2XX trucks powered by the LML 6.6L Duramax, repeated turbo heat soak and engine vibration cause the factory intake elbow to warp, crack, or lose coupler seal integrity. A compromised horn allows oil vapor seepage, unfiltered dirt ingestion, and pre-turbo air leaks that disrupt mass airflow readings. This unmetered airflow triggers P0101, P0299, or P2263 fault codes and degrades compressor efficiency under load.

Common Symptoms of a Failing OEM Intake Elbow

  • Check Engine Light / DTCs: Triggers P0101 or P0299 from unmetered intake air and disrupted turbocharger spool.
  • Oil Film & Loose Coupler: Visible oil residue at the horn joint or an intake coupler that will not stay sealed.
  • Turbulent Airflow & Dirt Ingestion: Cracked housing permits debris into the compressor wheel and lowers throttle response.

The Welded 3.5-Inch Intake Horn Solution

Engineered to replace WCF100417 and DD-421, this high-flow intake horn utilizes a formed, welded 3.5-inch inlet tube for an unobstructed airflow path into the turbocharger. Its precision turbo-side flange matches factory LML 6.6L Duramax bolt spacing and clocking to seat flat against the compressor housing. The rigid welded construction resists thermal distortion, maintaining a positive coupler seal and consistent airflow geometry.

What's Included

  • (1) 3.5-inch turbo intake elbow

Technical Specifications

Fitment 2011-2016 GMC Sierra
Engine / Chassis LML 6.6L Duramax / GMT900 / K2XX
Stock Engine Output 397 hp / 765 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # WCF100417, DD-421

Compatibility

  • 2011-2016 GMC Sierra 2500 6.6L Duramax (LML)
  • 2011-2016 GMC Sierra 3500 6.6L Duramax (LML)

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT900 / K2XX Sierra?

Yes. This is a direct fit for the 2011-2016 GMC Sierra equipped with the LML 6.6L Duramax engine. Excludes 6.0L gas Sierra trucks, 2004.5-2005 LLY Duramax engines, and Chevrolet Silverado models (listed separately).

Will this stop oil film leaks and P0101/P0299 fault codes?

Yes, when caused by a damaged factory horn. Replacing a cracked or warped elbow eliminates pre-turbo air leaks and oil film seepage, restoring accurate airflow into the LML 6.6L Duramax compressor.

Are gaskets, couplers, or bolts included for installation?

No. Package includes the elbow only; clean the turbo flange, install a new gasket or seal if specified, tighten evenly so the flange sits flat, verify coupler diameter, and inspect for leaks under boost.

The GMC Heavy-Duty Standard

Built for sustained towing loads and thermal durability on GMT900 / K2XX heavy-duty platforms. Always compare flange bolt pattern, clocking, and 3.5-inch inlet diameter against your factory horn prior to installation.




Mueble

Hacer

GMC

Tamaño del motor

  • 6.6L

Año

  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Turbo Intake Elbow for GMC Sierra (2011-2016) 6.6L

$161.95