Saltar al contenido del producto
1 de 3

Turbo Intake Elbow for Chevrolet Silverado (2011-2016) 6.6L



Precio regular $161.95
Precio de oferta $161.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

High-Flow 3.5-Inch Turbo Intake Elbow for 2011-2016 Chevrolet Silverado (GMT900 / K2XX)

What it Does: This 3.5-inch turbo intake elbow replaces the crack-prone factory horn on 2011-2016 Chevrolet Silverado 2500/3500 (GMT900 / K2XX) 6.6L LML Duramax trucks to restore sealed pre-turbo airflow.

The Stock Chevrolet Silverado Intake Horn Failure

On GMT900 / K2XX trucks equipped with the 6.6L LML Duramax, the factory plastic or thin-metal intake horn suffers from thermal cycling and oil vapor saturation. Heat soak warps the turbo-side flange and loosens the inlet clamp, allowing cracks and air leaks to form at the compressor joint. Unmetered air and oil residue upset intake flow into the charger, commonly triggering P0101 MAF performance or P0299 underboost codes.

Common Symptoms of a Failing OEM Turbo Intake Elbow

  • Check Engine Light / DTCs: Unmetered air leaks trigger P0101 or P0299 boost faults.
  • Oil Residue & Joint Leaks: Warped flanges or cracked walls seep PCV oil mist at the clamp.
  • Turbine Risk & Lag: Unfiltered air ingestion and disrupted airflow delay spool under load.

The Welded High-Flow Air Intake Solution

This 3.5-inch formed, welded turbo intake elbow replaces fragile OEM castings with smooth, high-flow mandrel geometry tailored specifically for 6.6L LML Duramax installations. Its rigid turbo-side flange matches factory bolt pattern, clocking, and 3.5-inch inlet diameter for a flat, distortion-free seal under sustained boost and high exhaust temperatures. Direct interchange fitment with WCF100417 and DD-421 restores clean compressor-inlet routing without coupler strain.

What's Included

  • (1) Turbo intake elbow

Technical Specifications

Fitment 2011-2016 Chevrolet Silverado
Engine / Chassis 6.6L LML Duramax / GMT900 & K2XX
Stock Engine Output 397 hp / 765 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # WCF100417, DD-421

Compatibility

  • 2011-2016 Chevrolet Silverado 2500 HD (6.6L LML Duramax)
  • 2011-2016 Chevrolet Silverado 3500 HD (6.6L LML Duramax)

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT900 / K2XX Silverado?

Yes. Direct fit for 2011-2016 Chevrolet Silverado 2500/3500 trucks with the 6.6L LML Duramax engine. Excludes 6.0L gas, 2004.5-2005 Duramax, and GMC Sierra (listed separately).

Does this resolve P0101/P0299 leak codes, and should I check clocking?

Yes. Fixing a cracked horn stops unmetered leaks causing P0101 or P0299 codes; verify flange bolt pattern, clocking, and 3.5-inch inlet diameter before ordering.

Are gaskets or couplers included?

No. Clean the flange, install a new specified seal, tighten evenly, never force mismatched couplers, and inspect for leaks under boost after startup.

The Chevrolet Heavy-Duty Standard

Engineered for heavy towing and thermal durability, this welded elbow keeps your 6.6L LML Duramax intake sealed and protects the compressor wheel under load.




Mueble

Hacer

Chevrolet

Tamaño del motor

  • 6.6L

Año

  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Turbo Intake Elbow for Chevrolet Silverado (2011-2016) 6.6L

$161.95