Saltar al contenido del producto
1 de 5

Radiator for Ford F-250 F-350 (1983-1996) 6.9L 7.3L



Precio regular $278.95
Precio de oferta $278.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

All-Aluminum Radiator for 1983-1996 Ford F-250,F-350 (Bullnose/Bricknose/OBS)

What it Does: This all-aluminum engine cooling radiator replaces a leaking or clogged factory core on 1983-1996 Ford F-250,F-350 Bullnose/Bricknose/OBS trucks with 6.9L / 7.3L Diesel engines, restoring coolant flow and heat rejection.

The Stock Ford F-250,F-350 Cooling Core Failure

Factory radiators on Bullnose/Bricknose/OBS trucks equipped with the 6.9L / 7.3L IDI Diesel fail from internal scale accumulation, core fin corrosion, and seam fatigue. Scale restricts coolant tubes during steep grades, causing rapid heat soak under towing loads. As tank seals degrade, system pressure drops, lowering the boiling point and triggering climbing dash gauges or P0217 coolant overtemperature faults on late-model OBD-II setups.

Common Symptoms of a Failing OEM Radiator

  • Rising Temperature Gauge / DTCs: Grade-climbing heat soak or P0217 alerts caused by scale-blocked core tubes.
  • Coolant Seepage: Tank staining and post-shutdown coolant loss from fatigued seams or cap failure.
  • Clogged Airflow: Debris-packed fins starving the 6.9L / 7.3L Diesel of cooling capacity under load.

The TIG-Welded Aluminum Cooling Solution

Replacing the worn DPI 1165 assembly, this unit pairs an all-aluminum core with TIG-welded aluminum tanks to eliminate weak crimped seams. With a 23-3/8" x 30-1/4" core (30-5/8" x 34" overall), it restores clean crossflow circulation for heavy diesel duty. OEM-style side brackets, a 1-3/4" inlet, and a 2" outlet match factory mounting geometry for bolt-on installation with the factory fan shroud.

What's Included

  • (1) All-Aluminum Radiator (DPI 1165)
  • (1) Radiator Cap

Technical Specifications

Fitment 1983-1996 Ford F-250,F-350
Engine / Chassis 6.9L / 7.3L Diesel / Bullnose/Bricknose/OBS
Cooling Specification All-Aluminum / TIG-Welded Tanks (23-3/8" x 30-1/4" Core)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # DPI 1165

Compatibility

  • Ford F-250 (1983-1996) 6.9L 7.3L
  • Ford F-350 (1983-1996) 6.9L 7.3L

Frequently Asked Questions & Fitment Warnings

Does this fit the Bullnose/Bricknose/OBS F-250,F-350?

Yes. This is a direct fit for the 1983-1996 Ford F-250,F-350 equipped with the 6.9L / 7.3L Diesel engine. Does not fit F-150 models or 5.0L, 5.8L, and 7.5L gas-engine F-250 and F-350 trucks.

Are a radiator cap and sensors included?

Cap included, sensors excluded. Install the supplied radiator cap and transfer any serviceable factory sensors from the original DPI 1165 core.

What installation checks are required?

Measure overall dimensions and neck locations first. Replace hardened hoses or clamps, keep the fan clear of fins, fill with 6.9L / 7.3L Diesel-spec coolant, bleed air, and recheck levels after warm-up.

The Ford Heavy-Duty Standard

Built for heavy towing and sustained grades, this all-aluminum radiator maintains steady thermal margins in hot working conditions. It delivers durable diesel cooling reliability mile after mile.




Mueble

Hacer

Ford

Tamaño del motor

  • 6.9L
  • 7.3L

Año

  • 1983
  • 1984
  • 1985
  • 1986
  • 1987
  • 1988
  • 1989
  • 1990
  • 1991
  • 1992
  • 1993
  • 1994
  • 1995
  • 1996

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Radiator for Ford F-250 F-350 (1983-1996) 6.9L 7.3L

$278.95