Performance Water Pump Kit for Subaru Legacy (1990-2005) 2.2L 2.5L

$79.95

Envío calculado al finalizar la compra.

Pago totalmente seguro
Con la confianza de miles de personas
Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Compre con seguridad

Asegure su experiencia de compra con varios métodos de pago seguros y confiables.

Compra segura con nosotros

High-Flow Water Pump & Thermostat Refresh Kit for 1990-2005 Subaru Legacy (BC/BD/BE/BL)

What it Does: The Performance Water Pump Kit refreshes the primary cooling circuit on the 1990-2005 Subaru Legacy to prevent cavitation, stabilize operating coolant temperatures, and protect EJ-series boxer head gaskets from thermal stress.

The Stock Subaru Legacy Thermal Vulnerability

Subaru horizontally opposed boxer platforms—specifically the EJ22, EJ25D, and EJ251—place extreme demands on continuous coolant circulation. Factory water pumps often suffer from premature bearing degradation, stamped impeller fatigue, and coolant seepage at the weep hole past 80,000 miles. Concurrently, aging mechanical wax-pellet thermostats lose calibration or stick, generating localized steam pockets in the lower cylinder jackets. This uneven thermal expansion across horizontally oriented heads is the leading mechanical catalyst for catastrophic boxer head gasket failures.

The Engineering Solution

This cooling service package replaces worn factory components with a precision-machined, OE-spec die-cast aluminum water pump designed to maintain consistent volumetric flow across both engine banks. Built with heavy-duty unitized shaft bearings and long-life mechanical carbon-ceramic face seals, the assembly resists high-RPM harmonic vibration and coolant wash. Paired with a direct-replacement mechanical wax-pellet thermostat featuring a dedicated jiggle pin for air purging, this kit prevents cavitation, mitigates hot spots, and restores factory thermal efficiency.

What's Included

1 Mechanical Water Pump Assembly
1 Water Pump Gasket
1 Engine Coolant Thermostat
1 Thermostat Seal

Technical Specifications

Fitment	1990-2005 Subaru Legacy
Engine / Chassis	EJ22, EJ25D, EJ251, EJ253 / BC, BD, BE, BL
Stock Output	130–175 hp / 137–169 lb-ft
Replaces OEM Part #	21111AA000, 21111AA001, 21111AA002, 21111AA003, 21111AA004, 21111AA005, 21111AA006, 21111AA007, 21111AA011, 21111AA110, 21200AA071, 21200AA072, AW9223, WP777, US9223, CP9223, NP1487, PA786, VKPC99407

Compatibility

1990-1999 Subaru Legacy 2.2L Gas SOHC Naturally Aspirated
1996-1999 Subaru Legacy 2.5L Gas DOHC Naturally Aspirated
2000-2005 Subaru Legacy 2.5L Gas SOHC Naturally Aspirated

Frequently Asked Questions & Fitment Warnings

Does this fit the BC, BD, BE, or BL Chassis Legacy?

Yes, this is a direct fit for the 1990-2005 Subaru Legacy equipped with the EJ22 and EJ25 naturally aspirated engines. This kit is strictly for naturally aspirated models and is NOT compatible with turbocharged WRX, STI, or Legacy GT platforms.

Do I need to bleed the cooling system after installing this water pump?

Yes, Subaru boxer engines require a vacuum-fill or spill-free funnel bleed procedure during refill to purge air pockets trapped in the lower thermostat housing and horizontal cylinder heads.

The Subaru Boxer Standard

Engineered to withstand the demanding thermal dynamics of horizontal boxer architecture, this refresh kit delivers the mechanical reliability, sustained flow rates, and seal integrity required to keep your high-mileage EJ engine running at peak efficiency.