Performance Water Pump Kit for Audi A7 (2019-2025) 3.0L

$519.95

Envío calculado al finalizar la compra.

Pago totalmente seguro
Con la confianza de miles de personas
Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Compre con seguridad

Asegure su experiencia de compra con varios métodos de pago seguros y confiables.

Compra segura con nosotros

Complete Mechanical Water Pump Kit for 2019-2025 Audi A7 (C8 / 4K8)

What it Does: The Performance Water Pump Kit replaces failure-prone factory cooling components on the 2019-2025 Audi A7 to maintain optimal engine operating temperatures and eliminate coolant leaks under high thermal loads.

The Stock Audi A7 Cooling System Vulnerability

The Audi A7 C8 platform equipped with the EA839 3.0L Turbo V6 relies on an intricate thermal management loop that subjects factory water pumps, vacuum-actuated shrouds, and plastic cross-over pipes to extreme heat cycles. Over time, OEM composite impellers degrade, internal vacuum diaphragms rupture, and factory plastic housings warp or crack. These continuous thermal stresses cause catastrophic coolant migration into vacuum lines, chronic weeping from the main shaft mechanical seal, and uncontrolled engine overheating.

The Engineering Solution

This comprehensive service kit eliminates thermal failure points by utilizing an all-aluminum pump housing and robust aluminum impeller designed to resist cavitation and thermal fatigue. Engineered specifically for the belt-driven configuration of the EA839 architecture, this assembly includes replacement solenoid valves, a thermal pneumatic valve, and a brand-new thermostat assembly to restore calibrated flow regulation across both the cylinder block and cylinder head circuits. Precision O-rings and pre-matched hardware ensure absolute sealing under high cooling system pressures.

What's Included

1 Engine Water Pump Assembly with Pulley
1 Thermostat Assembly
1 Coolant Water Pipe
1 Accessory Drive Pulley
2 Coolant Control Solenoid Valves
1 Thermal Pneumatic Valve
Complete O-Ring and Fixing Bolt Hardware Set

Technical Specifications

Fitment	2019-2025 Audi A7
Engine / Chassis	3.0L EA839 Turbo V6 / C8 (Type 4K8)
Stock Output	335 hp / 369 lb-ft
Replaces OEM Part #	9A712101303, 9A712101304, 06M121013D, 06M121013G, 06M121013C, 06M121031D, 06M121031G, N91121903, 06M 121 013G, 9A712111511, PAB121115B, PAC121115, 06M121115, 06M121678H, 06M121678F, 06M121678G, 9A712167800, PAB121678A, 06M121115J, 06M121115G, 06M121115K, 06M121115H, 9A712111510, 06M115401K, 06M115401L, 06M115401F, 06M115401E, 9A711540100, 9A711540105, 9A711540110, PAB115401, PAC115401, 06M117015M, 9A711701530, 06M121083J, 06M121083H, 9A712108300, 9A71210830

Compatibility

2019-2025 Audi A7 Sportback 3.0L Mild Hybrid Gas Turbo (EA839)

Frequently Asked Questions & Fitment Warnings

Does this fit the C8 A7?

Yes, this is a direct fit for the 2019-2025 Audi A7 equipped with the EA839 3.0L turbocharged engine. This kit does not fit 2.0L 4-cylinder engines or older pre-2019 C7-generation supercharged 3.0L engines.

Is an electronic vacuum bleeding procedure required during installation?

Yes, because the EA839 cooling system utilizes thermal management shut-off valves, factory vacuum filling and electronic bleed sequence cycling are required to prevent hot spots and air locks.

The Audi Precision Standard

Engineered to meet rigorous European thermal management tolerances, this cooling assembly ensures factory-spec ECU communication, zero check-engine lights, and leak-free reliability across all driving conditions.