Performance Timing Chain Kit for Saturn Vue (2008-2010) 3.6L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit Performance Timing Chain Kit for 2008-2010 Saturn Vue (GMT179)
What it Does: This performance timing chain kit synchronizes the crankshaft and dual overhead camshafts on the 2008-2010 Saturn Vue (GMT179) equipped with the LY7 3.6L High Feature V6 engine.
The Stock Saturn Vue Timing Drive Failure
The LY7 3.6L High Feature V6 in the GMT179 Saturn Vue uses a multi-chain timing drive vulnerable to oil aeration, extended drain intervals, and hydraulic tensioner bleed-down. Over time, primary and secondary link pins wear and elongate, while OEM plastic guide faces groove and fracture under thermal cycling. This slack retards camshaft phasing relative to the crankshaft, triggering P0008, P0016, or P0017 cam-correlation faults and risking piston-to-valve contact if a chain jumps a tooth.
Common Symptoms of a Failing OEM Timing Chain Assembly
- Check Engine Light / DTCs: Camshaft-to-crankshaft correlation codes such as P0008, P0016, and P0017 triggered by chain stretch.
- Audible Cold-Start Rattle: Metallic slapping from the front timing cover caused by bled-down tensioners and worn guide rails.
- Drivability & Engine Risk: Rough idle, sluggish acceleration, and severe valvetrain damage if a loose chain skips sprocket teeth.
The Direct-Fit Multi-Chain Timing Kit Solution
This direct-fit timing chain kit restores factory synchronization on the LY7 3.6L V6 using high-tensile steel roller-link primary and secondary chains built to resist pitch elongation. Matched hardened steel crankshaft and idler sprockets pair with reinforced polymer guide rails and calibrated hydraulic tensioners to maintain consistent chain preload across cold starts and high-RPM operation. All components install directly into OEM front-cover mounting bosses, replacing worn factory hardware matching OEM references 12600461, 12609258, and TKGM10436L.
What's Included
- 1x Primary Timing Chain
- 2x Secondary Timing Chains
- 1x Crankshaft Sprocket
- 2x Idler Sprocket Assemblies
- 4x Timing Chain Guides and Tensioners
Technical Specifications
| Fitment | 2008-2010 Saturn Vue |
|---|---|
| Engine / Chassis | LY7 3.6L High Feature V6 / GMT179 (Theta) |
| Stock Engine Output | 257 hp / 248 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 12600461, 12609258, TKGM10436L |
Compatibility
- 2008-2010 Saturn Vue — 3.6L Gas Naturally Aspirated (Manual or Automatic Transmission)
Frequently Asked Questions & Fitment Warnings
Does this fit the GMT179 Vue?
Yes. This is a direct fit for the 2008-2010 Saturn Vue equipped with the LY7 3.6L engine (manual or automatic). Does not fit 2.4L or 2.8L models, and is not compatible with Chrysler 3.6L Pentastar engines.
Will this resolve P0008 or P0016 cam-correlation codes and cold-start rattle?
Yes. Replacing stretched chains, grooved guides, and weak tensioners together restores cam-to-crank alignment and eliminates cold-start slap, clearing P0008, P0016, and P0017 faults once oil passages are clean.
Is a water pump included, and how involved is installation?
No, a water pump is not included. This comprehensive front-engine service requires supporting the engine, removing the front timing cover, aligning factory timing marks, and torquing fasteners to vehicle specifications.
The Saturn Precision Standard
Engineered for exact cam-to-crank phasing and sustained oil-pressure stability, this complete timing drive kit restores quiet cold starts and dependable valvetrain control. Built to handle daily thermal cycling in the GMT179 Vue, it protects your LY7 3.6L V6 against timing slip and costly internal engine damage.
Mueble
Mueble
|
Hacer |
Saturn |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$445.95