Performance Timing Chain Kit for Mercedes Benz M-Class (2012-2015) 3.0L 3.5L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit Timing Chain & VVT Adjuster Kit for 2012-2015 Mercedes Benz M-Class (W166)
What it Does: This complete timing chain and camshaft VVT adjuster kit synchronizes crankshaft and dual-overhead camshaft rotation on the 2012-2015 Mercedes Benz M-Class (W166) equipped with the M276 3.0L or 3.5L V6 engine.
The Stock Mercedes Benz M-Class Timing System Failure
On the W166 chassis powered by the M276 3.0L/3.5L V6, aging hydraulic timing chain tensioners lose oil pressure bleed-down resistance, creating chain slack during cold start before full oil pressure builds. Repeated chain whip fatigues polymer guide rails, elongates the primary chains, and wears internal locking pins inside the four camshaft VVT adjusters. Once cam-to-crank phase drifts past ECU tolerances, the engine controller logs correlation faults such as P0016, P0017, P0018, or P0019.
Common Symptoms of a Failing OEM Timing Chain & VVT Assembly
- Check Engine Light / Correlation DTCs: Illuminated MIL with P0016/P0017 (Bank 1) or P0018/P0019 (Bank 2) cam-crank correlation and VVT positioning faults.
- Cold-Start Timing Rattle: Sharp metallic clatter for 1–3 seconds upon startup caused by tensioner drain-back and chain slap against worn guides.
- Rough Idle & Timing Jump Risk: Erratic cam phasing, sluggish throttle response, and potential valve-to-piston interference if a stretched chain jumps teeth.
The Direct-Fit Multi-Chain & VVT Adjuster Solution
This comprehensive front-engine service kit replaces every critical wear component in the M276 timing drive simultaneously, restoring factory cam-timing geometry to OEM specifications (2760503100, 0009930776, 2760500117). Precision-machined camshaft VVT adjusters eliminate internal locking-pin play, while high-tensile primary, front, and oil-pump chains resist pitch elongation under sustained thermal load. Matched polymer guide slides, metal-backed guide assemblies, sprockets, and hydraulic tensioners install directly into factory mounting locations without modification.
What's Included
- 4 Camshaft VVT Adjusters
- 2 Large Timing Chains with Metal Guide Assemblies
- 1 Front Timing Chain
- 1 Oil Pump Timing Chain
- 2 Dark Guide Rails
- 2 White Guide Slides
- 1 Yellow Guide
- 1 Small Black Guide
- 2 Sprockets
- 3 Timing Chain Tensioners
Technical Specifications
| Fitment | 2012-2015 Mercedes Benz M-Class |
|---|---|
| Engine / Chassis | M276 3.0L / 3.5L V6 / W166 |
| Stock Engine Output | 302–329 hp / 273–354 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 2760503100, 0009930776, 2760500117 |
Compatibility
- 2015 Mercedes Benz M-Class — 3.0L Gas Turbocharged
- 2012-2015 Mercedes Benz M-Class — 3.5L Flex Naturally Aspirated
- 2012-2015 Mercedes Benz M-Class — 3.5L Gas Naturally Aspirated
Frequently Asked Questions & Fitment Warnings
Does this fit the W166 M-Class?
Yes. This is a direct fit for the 2012-2015 Mercedes Benz M-Class equipped with the M276 3.0L (2015 Gas Turbocharged) or 3.5L V6 (2012-2015 Gas and Flex Naturally Aspirated) engine. This kit does not fit diesel ML350 or CLS350 applications.
Will this resolve P0016/P0018 correlation codes, and are timing tools included?
Yes, replacing stretched chains, weak tensioners, and worn VVT adjusters resolves mechanical cam-timing drift causing P0016–P0019 codes, provided sensors and solenoids are functioning properly. Factory cam-locking timing tools are not included with this kit.
Is a water pump included, and what does installation require?
No, a water pump is not included in this package. Installation is an advanced front-engine timing service requiring engine support, front cover removal, locking the M276 at factory TDC timing marks, and torquing all fasteners to OEM specifications.
The Mercedes Benz Precision Standard
Engineered to restore factory M276 camshaft phasing accuracy, this complete timing overhaul eliminates cold-start clatter and maintains strict ECU synchronization for CEL-free operation. Built to OEM tolerances, it delivers consistent valvetrain stability and dependable long-term engine protection.
Mueble
Mueble
|
Hacer |
Mercedes Benz |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$1,033.95