Saltar al contenido del producto
1 de 6

Performance Timing Chain Kit for Mercedes Benz CLS-Class (2012-2016) 3.0L 3.5L



Precio regular $1,033.95
Precio de oferta $1,033.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Timing Chain & VVT Adjuster Kit for 2012-2016 Mercedes Benz CLS-Class (C218)

What it Does: This direct-fit timing chain and VVT adjuster kit synchronizes crankshaft and dual-overhead camshaft rotation on the 2012-2016 Mercedes Benz CLS-Class (C218) equipped with the M276 3.0L / 3.5L V6 engine.

The Stock Mercedes Benz CLS-Class Timing Chain & Tensioner Failure

On the C218 CLS-Class powered by the M276 V6 (2760503100), oil drain-back and cold-start hydraulic pressure lag starve the primary timing chain tensioners and camshaft VVT adjusters. Repeated thermal cycling accelerates polymer guide rail wear and causes internal locking-pin fatigue inside the cam phasers. As chain elongation exceeds factory tolerances, camshaft-to-crankshaft correlation drifts, triggering P0016, P0017, P0018, or P0019 fault codes and risking severe valve-to-piston contact if a chain jumps teeth.

Common Symptoms of a Failing OEM Timing Chain & VVT System

  • Check Engine Light / Correlation DTCs: Cam-to-crank timing drift triggers P0016, P0017, P0018, or P0019 faults due to retarded or erratic camshaft phasing.
  • Cold-Start Metallic Rattle: Slack timing chains slap worn polymer guide rails for 1–3 seconds at startup before tensioner oil pressure stabilizes.
  • Rough Idle & Drivability Loss: Fatigued VVT adjusters (2760503100) fail to lock at base timing, causing rough idling, power loss, and catastrophic engine damage if skipped.

The Direct-Fit Multi-Chain & VVT Adjuster Solution

This comprehensive timing service kit restores factory valvetrain synchronization using OE-geometry chains, hardened sprockets, and four replacement camshaft VVT adjusters (2760503100, 0009930776, 2760500117). Precision-machined metal guide assemblies and wear-resistant polymer slides maintain consistent tension across the multi-chain M276 front drive layout. Every tensioner, guide rail, and oil-pump chain installs directly into factory C218 mounting locations with zero cutting or modification, restoring quiet cold starts and accurate ECU timing control.

What's Included

  • 4 Camshaft VVT Adjusters
  • 2 Large Timing Chains with Metal Guide Assemblies
  • 1 Front Timing Chain
  • 1 Oil-Pump Timing Chain
  • 2 Dark Guide Rails
  • 2 White Guide Slides
  • 1 Yellow Guide
  • 1 Small Black Guide
  • 2 Sprockets
  • 3 Timing Chain Tensioners

Technical Specifications

Fitment 2012-2016 Mercedes Benz CLS-Class
Engine / Chassis M276 3.0L Turbo / 3.5L NA V6 / C218
Stock Engine Output 302–329 hp / 273–354 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 2760503100, 0009930776, 2760500117

Compatibility

  • 2015–2016 Mercedes Benz CLS-Class — 3.0L Gas Turbocharged (M276 V6)
  • 2012–2014 Mercedes Benz CLS-Class — 3.5L Gas Naturally Aspirated (M276 V6)

Frequently Asked Questions & Fitment Warnings

Does this fit the C218 CLS-Class?

Yes. This is a direct fit for the 2012-2016 Mercedes Benz CLS-Class equipped with the M276 3.0L / 3.5L V6 engine. Diesel applications (such as CLS350/ML350 diesel) are excluded; verify 3.0L gas turbocharged (2015-2016) or 3.5L gas naturally aspirated (2012-2014) fitment before ordering.

Will this clear P0016/P0017 correlation codes, and are timing tools included?

Yes, replacing stretched chains, worn tensioners, and faulty VVT adjusters resolves mechanical timing drift causing P0016–P0019 faults. Timing locking tools and a water pump are not included in this kit.

What installation preparation is required for the M276 timing service?

Professional installation is recommended using factory timing locking tools and vehicle torque specifications. The service requires supporting the engine, removing front timing covers, locking the M276 at factory timing marks, and installing all chains, guides, tensioners, sprockets, and adjusters in factory sequence.

The Mercedes Benz Precision Standard

Built to restore factory M276 valvetrain geometry, this complete timing kit eliminates cold-start rattle and keeps C218 ECU camshaft-phase feedback within strict factory tolerances. Count on restored mechanical synchronization and CEL-free reliability.




Mueble

Hacer

Mercedes Benz

Tamaño del motor

  • 3.0L
  • 3.5L

Año

  • 2012
  • 2013
  • 2014
  • 2015
  • 2016

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Performance Timing Chain Kit for Mercedes Benz CLS-Class (2012-2016) 3.0L 3.5L

$1,033.95