Saltar al contenido del producto
1 de 6

Performance Timing Chain Kit for Buick LaCrosse (2007-2016) 3.0L 3.6L



Precio regular $445.95
Precio de oferta $445.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Performance Timing Chain Kit for 2007-2016 Buick LaCrosse (W-Body / Epsilon II)

What it Does: This timing chain kit synchronizes the crankshaft and dual-overhead camshafts on 2007-2016 Buick LaCrosse W-Body and Epsilon II models equipped with the GM HFV6 3.0L or 3.6L engine.

The Stock Buick LaCrosse Timing Drive Failure

On W-Body and Epsilon II LaCrosse models with the GM HFV6 (LY7, LF1, LLT, LFX), the factory DOHC timing drive uses one primary and two secondary chains. Oil aeration, extended service intervals, and heat soak degrade hydraulic tensioners and abrade composite guide faces. As chain pins wear and tensioner preload drops, timing slack triggers cam-crank correlation faults such as P0008, P0016, and P0017. Left unaddressed, a jumped tooth causes severe valve-to-piston contact.

Common Symptoms of a Failing OEM Timing Chain System

  • Check Engine Light / Correlation DTCs: Codes P0008, P0009, P0016, P0017, P0018, or P0019 trigger when stretched links shift cam phase outside ECM tolerances.
  • Cold-Start Timing Rattle: Bleed-down in worn tensioners allows slack chain slap against brittle guides until oil pressure builds.
  • Drivability & Engine Damage Risk: Delayed valve timing causes rough idle and power loss, while a skipped tooth leads to bent valves.

The Direct-Fit High-Feature V6 Timing Solution

This direct-fit timing chain kit replaces the primary chain, secondary chains, crank sprocket, dual idler assemblies, guides, and tensioners as a matched service set. Manufactured to OEM dimensional tolerances under 12600461, 12609258, and TKGM10436L specifications, the hardened steel chain links and precision-machined sprockets resist elongation under high RPM load. Fresh hydraulic tensioners restore consistent oil-pressure damping across cold starts. Installing all drive components together eliminates mixed-wear harmonics during front-engine timing service on the 3.0L and 3.6L V6.

What's Included

  • 1 Primary Timing Chain
  • 2 Secondary Timing Chains
  • 1 Crankshaft Sprocket
  • 2 Idler Sprocket Assemblies
  • 4 Timing Chain Guides and Tensioners

Technical Specifications

Fitment 2007-2016 Buick LaCrosse
Engine / Chassis 3.0L (LF1) & 3.6L (LY7, LLT, LFX) HFV6 / W-Body & Epsilon II
Stock Engine Output 240–304 hp / 217–264 lb-ft
Installation Type Direct Bolt-On OEM Replacement (Front Cover Service Required)
Replaces OEM Part # 12600461, 12609258, TKGM10436L

Compatibility

  • Buick LaCrosse 3.0L Gas Naturally Aspirated — 2010
  • Buick LaCrosse 3.6L Flex Naturally Aspirated — 2012-2016
  • Buick LaCrosse 3.6L Gas Naturally Aspirated — 2007-2008, 2010-2011, 2016

Frequently Asked Questions & Fitment Warnings

Does this fit the W-Body / Epsilon II LaCrosse?

Yes. This is a direct fit for the 2007-2016 Buick LaCrosse equipped with the 3.0L or 3.6L GM HFV6 (LY7, LF1, LLT, LFX) engine listed in Compatibility. Does not fit 2.4L, 2.8L, or Chrysler 3.6L Pentastar engines.

Will this kit resolve P0008, P0016, and P0017 cam-crank correlation codes?

Yes, when chain stretch or tensioner wear is the root cause. Replacing the primary and secondary chains, guides, tensioners, and sprockets restores factory cam-to-crank phase alignment, provided VVT phasers and oil pressure meet spec.

Is a water pump included, and does transmission type affect fitment?

No water pump is included; this is a timing chain, guide, tensioner, and sprocket kit only. It fits both manual and automatic transmissions when year, model, and displacement match, and requires supporting the engine, removing the front cover, aligning timing marks, and torquing fasteners to factory spec.

The Buick Precision Standard

Engineered to restore factory valvetrain timing geometry and quiet cold-start operation across high-mileage GM HFV6 platforms. Built for reliable cam-crank synchronization and CEL-free daily drivability without guesswork.




Mueble

Hacer

Buick

Tamaño del motor

  • 3.0L
  • 3.6L

Año

  • 2007
  • 2008
  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Performance Timing Chain Kit for Buick LaCrosse (2007-2016) 3.0L 3.6L

$445.95