Performance Timing Chain Kit for BMW X4 (2015-2017) 3.0L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit Timing Chain & VANOS Kit for 2015-2017 BMW X4 (F26)
What it Does: A complete front-engine timing service kit for the 2015-2017 BMW X4 (F26) N55 3.0L inline-six that synchronizes crankshaft-to-camshaft phase and restores factory VANOS variable valve timing control.
The Stock BMW X4 Timing Drive & VANOS Failure
On the F26 chassis powered by the N55 3.0L turbocharged inline-six, sustained oil heat cycles and extended drain intervals degrade hydraulic tensioner pressure and embrittle the polymer chain guide rails. As the timing chain elongates and the intake or exhaust VANOS camshaft adjustment units wear internally, cam-to-crank phase drifts outside ECU tolerance. This mechanical slack triggers camshaft correlation faults such as P0012, P0015, and P0016, risking skipped timing teeth and severe valvetrain interference if ignored.
Common Symptoms of a Failing OEM Timing Chain Kit
- Check Engine Light & VANOS Faults: Triggers camshaft position and timing correlation DTCs such as P0012, P0015, P0016, or P0340 due to sluggish adjuster response or chain stretch.
- Cold-Start Metallic Rattle: Audible chain slap against fatigued guide rails during initial cranking before engine oil pressure stabilizes the hydraulic tensioner.
- Rough Idle & Power Loss: Erratic cam phasing causes misfires, sluggish throttle response, and reduced low-end boost efficiency.
The Direct-Fit Timing Chain & VANOS Solution
Replacing the chain, guides, tensioner, sprocket, and both intake and exhaust VANOS camshaft adjustment units simultaneously eliminates cumulative wear across the entire front timing assembly. Precision-machined sprocket teeth and wear-resistant guide rails maintain stable chain geometry across high-RPM load transitions. Engineered as a direct OEM-spec replacement for part numbers 11317502180 and 11317584084, every component installs into factory mounting bosses using standard TDC locking procedures and OEM torque specifications.
What's Included
- 2 Camshaft Adjustment Units (Intake and Exhaust)
- 1 Timing Chain
- 1 Timing Chain Rail and Guide Assembly
- 1 Timing Chain Rail
- 1 Timing Chain Tensioner
- 1 Sprocket
Technical Specifications
| Fitment | 2015-2017 BMW X4 |
|---|---|
| Engine / Chassis | N55 3.0L Inline-Six Turbo / F26 |
| Stock Engine Output | 300-355 hp / 300-343 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (Requires TDC Timing Lock) |
| Replaces OEM Part # | 11317502180, 11317584084 |
Compatibility
- 2015-2017 BMW X4 — 3.0L Gas Turbocharged
Frequently Asked Questions & Fitment Warnings
Does this fit the F26 X4?
Yes. This is a direct fit for the 2015-2017 BMW X4 equipped with the N55 3.0L gas turbocharged inline-six engine. This kit is not listed for 2.0L N20 or 2.5L engines; confirm engine displacement before ordering.
Are both camshaft adjustment units included, and will this resolve VANOS timing codes?
Yes. Both the intake and exhaust VANOS camshaft adjustment units are included alongside the chain, rails, tensioner, and sprocket to eliminate mechanical slack causing P0012, P0015, and P0016 faults. After locking the N55 3.0L at TDC and torquing all fasteners to factory specifications, clear stored ECU adaptations.
Does this kit include a water pump or single-use bolt and washer hardware?
No. This package contains the timing chain, guide assembly, rail, tensioner, sprocket, and both camshaft adjustment units only; a water pump and bolt/washer hardware pack are not included. Source replacement factory torque-to-yield fasteners before beginning front-engine disassembly.
The BMW Precision Standard
Built to restore exact valve-timing synchronization and ECU-commanded VANOS responsiveness on the F26 platform, this comprehensive timing kit keeps your N55 3.0L operating free of timing faults and cold-start rattle. Confirm model year and 3.0L displacement, then pair with fresh factory fasteners for a reliable, long-term front-engine overhaul.
Mueble
Mueble
|
Hacer |
BMW |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$418.95