Saltar al contenido del producto
1 de 6

Performance Timing Chain Kit for BMW X1 (2013-2015) 3.0L



Precio regular $418.95
Precio de oferta $418.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Timing Chain & VANOS Adjuster Kit for 2013-2015 BMW X1 (E84)

What it Does: This complete timing chain and camshaft adjustment kit synchronizes crankshaft and dual-camshaft rotation on the 2013-2015 BMW X1 E84 equipped with the N55B30 3.0L turbocharged inline-six engine.

The Stock BMW X1 Timing Chain & VANOS Failure

High thermal cycling and extended oil intervals on the E84 chassis with the N55B30 3.0L engine accelerate plastic guide rail embrittlement and chain elongation. As the hydraulic tensioner loses preload and internal VANOS phaser vanes wear, camshaft timing drifts from crankshaft phase. This mechanical slack triggers faults like P0012, P0015, and P0016, risking skipped teeth and valve-to-piston contact.

Common Symptoms of a Failing OEM Timing Chain & Adjuster Assembly

  • Cold-Start Rattle & DTCs: Metallic chain slap at startup from slack guides, often setting P0012, P0015, or P0016 cam-crank correlation codes.
  • Rough Running & VANOS Faults: Unstable idle and reduced boost response caused by worn intake or exhaust camshaft adjusters bleeding oil pressure.
  • Timing Jump & Internal Damage: Fractured rails or severe chain stretch allowing tooth jump on the sprocket, causing bent valves.

The Direct-Fit Timing Assembly Solution

Replacing the chain, guides, tensioner, sprocket, and both VANOS adjusters together restores factory timing geometry on the N55 3.0L inline-six. Each component meets OEM dimensional tolerances for direct bolt-on installation at factory mounting points, replacing OE references 11317502180 and 11317584084. Fresh composite rail assemblies, a high-preload tensioner, and dual intake/exhaust adjusters eliminate harmonic chain whip and stabilize cam phasing across the RPM range.

What's Included

  • 2 Camshaft Adjustment Units (Intake and Exhaust)
  • 1 Timing Chain
  • 1 Timing Chain Rail and Guide Assembly
  • 1 Timing Chain Rail
  • 1 Timing Chain Tensioner
  • 1 Sprocket

Technical Specifications

Fitment 2013-2015 BMW X1
Engine / Chassis N55B30 3.0L Gas Turbocharged / E84
Stock Engine Output 300 hp / 300 lb-ft
Installation Type Direct Bolt-On OEM Replacement (Factory Timing Locations)
Replaces OEM Part # 11317502180, 11317584084

Compatibility

  • 2013-2015 BMW X1 (E84) — 3.0L Gas Turbocharged

Frequently Asked Questions & Fitment Warnings

Does this fit the E84 X1?

Yes. This is a direct fit for the 2013-2015 BMW X1 equipped with the N55B30 3.0L engine. This kit does not fit 2.0L N20 or 2.5L engine applications.

Are both camshaft adjustment units included, and will this resolve VANOS timing codes?

Yes. Both intake and exhaust VANOS camshaft adjusters are included with the chain, rails, tensioner, and sprocket to correct mechanical timing drift causing P0012, P0015, and P0016 faults.

Are a water pump, bolts, or washer packs included for installation?

No. A water pump and bolt/washer hardware pack are not included; lock the engine at TDC during service and torque all replacement fasteners to factory specifications.

The BMW Precision Standard

Built for E84 drivetrains, this kit restores ECU cam-timing synchronization for CEL-free operation and consistent VANOS oil-pressure response. Maintain factory TDC alignment and torque procedures to protect valvetrain durability under turbocharged loads.




Mueble

Hacer

BMW

Tamaño del motor

  • 3.0L

Año

  • 2013
  • 2014
  • 2015

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Performance Timing Chain Kit for BMW X1 (2013-2015) 3.0L

$418.95