Saltar al contenido del producto
1 de 6

PCV Valve Cover Membrane Kit for Land Rover Range Rover Sport (2010-2020) 3.0L 5.0L



Precio regular $37.95
Precio de oferta $37.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit PCV Valve Cover Membrane Kit for 2010-2020 Land Rover Range Rover Sport (L320/L494)

What it Does: This direct-fit PCV Valve Cover Membrane Kit restores crankcase vapor separation and vacuum regulation on the 2010-2020 Land Rover Range Rover Sport (L320/L494) equipped with the AJ126 3.0L V6 or AJ133 5.0L V8 engine without replacing the entire valve cover.

The Stock Land Rover Range Rover Sport PCV Membrane Failure

Under sustained under-hood heat soak and oil vapor exposure on the L320 and L494 platforms, the factory elastomer diaphragm inside the valve cover hardens, loses elasticity, and tears. Once compromised on the AJ126 3.0L V6 or AJ133 5.0L V8, unmetered air bypasses the intake tract and disrupts crankcase vacuum balance. This vacuum leak triggers lean fuel-trim faults such as P0171/P0174 alongside P0507 idle-speed codes and forces oil mist into the intake manifold.

Common Symptoms of a Failing OEM PCV Membrane

  • Check Engine Light / Lean DTCs: Unmetered vacuum leaks past a ruptured diaphragm trigger P0171/P0174 bank-lean codes and P0507 high-idle faults.
  • Audible Valve Cover Whistle: High-pitched whistling or whooshing noises from the valve cover area caused by crankcase vacuum pulling air through a torn membrane.
  • Rough Idle & Oil Ingestion: Unstable idle quality, excessive crankcase pressure, and heavy oil residue accumulating inside the intake tract.

The Direct-Fit Valve Cover Service Solution

Designed as an exact dimensional match for OEM assemblies LR133579, C2D60163, and 102123488, this service kit replaces only the wear components inside the factory valve cover housing. The oil-resistant diaphragm membrane, calibrated tension spring, and precision-molded retention cap restore proper crankcase pressure modulation and oil-vapor separation. Installing the kit at the factory valve-cover port eliminates vacuum leaks, stabilizes fuel trims, and prevents oil carry-over without requiring full valve-cover replacement.

What's Included

  • 1 x PCV Cap
  • 1 x PCV Membrane
  • 1 x Spring (Note: Not a complete valve cover; the AJ133 5.0L V8 uses 4 kits total, not 2)

Technical Specifications

Fitment 2010-2020 Land Rover Range Rover Sport
Engine / Chassis AJ126 3.0L V6, AJ133 5.0L V8 / L320, L494
Stock Engine Output 340–575 hp / 332–516 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # LR133579, C2D60163, 102123488

Compatibility

  • 2014-2017 Land Rover Range Rover Sport — 3.0L Gas Supercharged (AJ126 / L494)
  • 2010-2013 Land Rover Range Rover Sport — 5.0L Gas Naturally Aspirated (AJ133 / L320)
  • 2010-2018, 2020 Land Rover Range Rover Sport — 5.0L Gas Supercharged (AJ133 / L320, L494)

Frequently Asked Questions & Fitment Warnings

Does this fit the L320/L494 Range Rover Sport?

Yes. This is a direct fit for the 2010-2020 Land Rover Range Rover Sport equipped with the AJ126 3.0L V6 or AJ133 5.0L V8 engine listed above. This kit will not fit 2.0L or 4.2L engines, and it is not a complete valve cover assembly.

How many kits does the 5.0L V8 need, and will this resolve P0171/P0174 codes?

Four kits total are required for the 5.0L V8, not two. Replacing torn diaphragms restores sealed crankcase vacuum on the AJ133 and AJ126, addressing whistling noises and lean-condition faults like P0171/P0174; confirm the exact quantity required for your 3.0L or 5.0L engine before ordering.

Is installation difficult and what prep is required?

No, installation is a straightforward valve-cover service. Access the PCV cap on the valve cover, remove the old cap, membrane, and spring, clean the seating surface of oil and debris, and install the new components in factory order.

The Land Rover Precision Standard

Restoring factory crankcase vacuum integrity protects your AJ126 or AJ133 intake tract from oil fouling while maintaining strict ECU fuel-trim precision. Count on OEM-spec sealing components to keep your Range Rover Sport running CEL-free under daily and high-load operation.




Mueble

Hacer

Land Rover

Tamaño del motor

  • 3.0L
  • 5.0L

Año

  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018
  • 2019
  • 2020

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

PCV Valve Cover Membrane Kit for Land Rover Range Rover Sport (2010-2020) 3.0L 5.0L

$37.95