PCV Valve Cover Membrane Kit for BMW X4 (2019-2020) 3.0L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit PCV Valve Cover Membrane Kit for 2019-2020 BMW X4 (G02)
What it Does: This four-piece PCV Valve Cover Membrane Kit restores sealed positive crankcase ventilation on the 2019-2020 BMW X4 (G02) equipped with the B58 3.0L turbocharged inline-six engine without replacing the complete valve cover.
The Stock BMW X4 Crankcase Ventilation Failure
Heat soak and continuous blow-by oil vapor degrade the factory elastomer diaphragm inside the G02 B58 3.0L valve cover over time. Repeated thermal cycling causes the membrane to harden, tear, or collapse against its internal spring, breaking crankcase vacuum regulation. Once ruptured, unmetered air enters the intake tract and disrupts oil separator pressure. This condition commonly triggers P0171 lean mixture codes, P0507 high idle faults, and P052E PCV regulator errors.
Common Symptoms of a Failing OEM PCV Membrane
- Check Engine Light / DTCs: Unmetered vacuum leaks and erratic crankcase pressure trigger P0171 (System Too Lean), P0507 (Idle Air Control RPM Higher Than Expected), or P0300 misfire faults.
- Audible Whistle & Rough Idle: A torn diaphragm pulls air past the cap seal, creating a high-pitched squeal from the valve cover and unstable idle control.
- Oil Ingestion & Excess Pressure: Loss of crankcase vacuum draws oil vapors into the intake tract and places excess pressure on crankshaft seals.
The Direct-Fit Valve Cover PCV Service Solution
Engineered to match OEM 11127645173 and 11 12 1 025 447 geometry, this four-piece kit replaces the cap, membrane, spring, and washer seal as a matched assembly. The oil- and heat-resistant elastomer diaphragm restores consistent crankcase vacuum modulation across idle and boosted operation on the B58 3.0L engine. Direct-fit dimensions allow every component to seat squarely into the factory valve cover housing. Technicians restore sealed PCV operation without replacing the complete valve cover.
What's Included
- 1 PCV Cap
- 1 PCV Membrane
- 1 Spring
- 1 Washer Seal
Technical Specifications
| Fitment | 2019-2020 BMW X4 |
|---|---|
| Engine / Chassis | B58 3.0L Gas Turbocharged / G02 |
| Stock Engine Output | 355–382 hp / 365–368 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 11127645173, 11 12 1 025 447 |
Compatibility
- 2019-2020 BMW X4 (G02) — 3.0L Gas Turbocharged (B58)
Frequently Asked Questions & Fitment Warnings
Does this fit the G02 X4?
Yes. This is a direct fit for the 2019-2020 BMW X4 equipped with the B58 3.0L engine. This kit is not compatible with B48 2.0L engines (including 2.0L 530i or 2.0L 740i applications) and is not a complete valve cover assembly.
Will this resolve P0171 vacuum leak codes and valve cover whistling?
Yes, when caused by a torn or collapsed PCV diaphragm. Replacing all four wear components matching OEM 11127645173 and 11 12 1 025 447 restores crankcase vacuum regulation and eliminates unmetered air ingestion.
What does installation require?
Standard hand tools and clean seating prep. Access the PCV cap on the valve cover, remove the worn cap, membrane, spring, and washer seal, thoroughly clean the housing seating surface, and install the four new pieces in factory order.
The BMW Precision Standard
Maintaining exact crankcase vacuum tolerances is critical for stable fuel trims, clean intake tracts, and CEL-free operation on the B58 3.0L platform. Restoring the factory PCV sealing geometry protects engine gaskets and turbocharger oil seals under sustained load.
Mueble
Mueble
|
Hacer |
BMW |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$40.95