Oxygen Sensors for GMC Canyon (2009-2012) 5.3L Upstream & Downstream
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Precision-Calibrated Oxygen Sensor Set for 2009-2012 GMC Canyon
What it Does: The 4-piece oxygen sensor kit replaces worn factory upstream and downstream sensors on the 2009-2012 Canyon to restore precise closed-loop air-fuel management, clear catalytic efficiency trouble codes, and stabilize idle quality.
The Stock GMC Canyon Exhaust Sensor Degradation
Factory lambda sensors on the GMT355 platform endure extreme thermal cycling and exhaust gas contamination over prolonged service intervals. As the internal zirconia ceramic planar elements age, response switching speeds between rich and lean states degrade significantly. This sluggish sensor latency skews short-term and long-term fuel trims (STFT/LTFT), leading to unburnt hydrocarbon accumulation, spark plug fouling, diminished fuel economy, and persistent check engine lights (CEL) triggered by codes such as P0130 through P0161 or catalytic threshold DTCs P0420 and P0430.
The Engineering Solution
Engineered to restore original equipment response rates, this direct-fit 4-piece sensor array features dual-layer stainless steel outer shielding to isolate the internal sensing element from particulate contamination and thermal shock. Precision-calibrated heaters reach operational light-off temperatures within seconds, ensuring rapid transition from open to closed-loop ECU calibration. Pinned factory-style weather-pack connectors eliminate wire splicing, ensuring uninterrupted signal continuity back to the ECM without resistance fluctuations.
Technical Specifications
| Fitment | 2009-2012 GMC Canyon |
|---|---|
| Engine / Chassis | 5.3L Vortec LH8 / LH9 Gen IV V8 / GMT355 |
| Stock Output | 300 hp / 320 lb-ft |
| Replaces OEM Part # | 12609459, 12611165, 12573167, 12587785 |
Compatibility
- 2009-2012 GMC Canyon SLE 5.3L V8
- 2009-2012 GMC Canyon SLT 5.3L V8
- 2009-2012 GMC Canyon WT 5.3L V8
Frequently Asked Questions
Does this fit the GMT355 Canyon?
Yes, this is a direct fit for the 2009-2012 GMC Canyon equipped with the LH8 or LH9 5.3L V8 engine.
Do these sensors require cutting or splicing into the factory harness?
No, each sensor features factory-spec keyway connectors designed for direct plug-and-play installation into the OEM engine harness.
The GMC Truck Standard
Maintaining accurate air-fuel metering is critical to hauling capacity and engine longevity. Replacing all four sensors as a matched set restores the stoichiometric fuel balance necessary to preserve exhaust valves, maintain towing torque, and protect catalytic converters under heavy load.
Mueble
Mueble
Garantía
Garantía
