Saltar al contenido del producto
1 de 5

O2 Oxygen Sensor Upstream Downstream for Toyota Tacoma (2009-2011) 4.0L



Precio regular $136.95
Precio de oferta $136.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2009-2011 Toyota Tacoma (N200)

What it Does: Monitors pre- and post-catalyst exhaust oxygen levels on the 2009-2011 Toyota Tacoma (N200) 1GR-FE 4.0L V6 to regulate air-fuel ratio and verify catalytic converter efficiency.

The Stock Toyota Tacoma O2 Sensor Failure

Under high-mileage towing heat cycles, OEM zirconia sensing elements on the N200 Tacoma equipped with the 1GR-FE 4.0L V6 suffer thermal shock and carbon fouling. Internal heater circuits frequently open from moisture intrusion and exhaust vibration, delaying closed-loop fuel control. As upstream and downstream sensors turn sluggish, the ECM loses accurate Bank 1 and Bank 2 lambda feedback, triggering P0031/P0051, P0136/P0156, and P2195 codes.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Triggers heater or response faults like P0031/P0051, P0136/P0156, and P0420/P0430.
  • Rich Fuel Trim: Skewed lambda readings cause rough idle, sulfur exhaust odor, and fouled plugs.
  • Failed Emissions & Poor MPG: Open-loop fueling reduces mileage and blocks readiness monitors.

The Direct-Fit Stainless O2 Sensor Solution

Replacing all four positions as a matched set restores balanced Bank 1 and Bank 2 fuel trims across the 1GR-FE 4.0L V6. Each sensor uses a laser-welded stainless shroud, high-alumina ceramic core, and fast-light-off heater resistant to condensation shock. Pre-coated threads and factory-length harnesses with OEM plugs deliver direct fitment matching 89467-12010 specifications without wire splicing or exhaust modification.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2009-2011 Toyota Tacoma
Engine / Chassis 1GR-FE 4.0L V6 / N200
Sensor Architecture 4-Wire Heated Upstream & Downstream Kit
Installation Type Direct Thread-In OEM Plug-and-Play (No Splicing or Welding)
Replaces OEM Part # 89467-12010

Compatibility

  • 2009-2011 Toyota Tacoma 4.0L V6

Frequently Asked Questions & Fitment Warnings

Does this fit the N200 Tacoma?

Yes. Direct fit for 2009-2011 Toyota Tacoma 1GR-FE 4.0L V6 models. Excludes 2.7L 4-cylinder engines; confirm engine before ordering.

Will this clear P0031, P0136, or P2195 codes?

Yes, if sensor-related. Replacing all four Bank 1/Bank 2 sensors (OEM 89467-12010) resolves heater and slow-response faults once cleared.

Is wire splicing required for installation?

No. All four sensors include factory OEM connectors and pre-applied anti-seize; torque cleanly into existing exhaust bungs.

The Toyota Heavy-Duty Standard

Engineered for towing heat and rugged trail duty on your N200 Tacoma, this matched sensor kit protects catalytic converters and keeps your 1GR-FE 4.0L V6 running clean.




Mueble

Hacer

Toyota

Tamaño del motor

  • 4.0L

Año

  • 2009
  • 2010
  • 2011

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Toyota Tacoma (2009-2011) 4.0L

$136.95