Saltar al contenido del producto
1 de 5

O2 Oxygen Sensor Upstream Downstream for Toyota Corolla Matrix (2011-2013) 1.8L



Precio regular $59.95
Precio de oferta $59.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2011-2013 Toyota Corolla,Matrix (E140)

What it Does: This matched upstream and downstream oxygen sensor kit restores closed-loop fuel trim control and catalyst monitoring on the 2011-2013 Toyota Corolla,Matrix E140 (2ZR-FE 1.8L).

The Stock Toyota Corolla,Matrix Sensor Failure

Over prolonged exhaust heat cycles on the E140 chassis with the 2ZR-FE 1.8L engine, OEM sensors suffer heater element burnout and silicone or carbon poisoning. When upstream sensor 8946702070 slows down, the ECM receives delayed lambda feedback and defaults to rich open-loop fuel trims. A degraded downstream sensor (8946774040) simultaneously misreads catalyst oxygen storage, triggering emissions fault codes and reduced fuel mileage.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers codes like P0138, P0141, P0420, or P2195 from heater opens or lazy switching.
  • Erratic Fuel Trims: Fouled sensing tips cause rough idle, hesitation, and rich exhaust odor.
  • Failed Emissions & Poor MPG: Open-loop fueling wastes fuel and blocks OBD-II readiness.

The Direct-Fit Heated Zirconia Solution

Replacing both positions simultaneously eliminates cross-aging signal lag between pre-catalyst and post-catalyst ECM monitors. Each unit features a planar ceramic zirconia sensing element, laser-welded stainless protective shield, and fast-response internal heater for rapid closed-loop light-off. Calibrated to factory 234-9112 and 234-4305 electrical resistance curves, these direct-fit sensors include OEM-style 4-wire weatherproof connectors and anti-seize coated threads for plug-and-play installation without cutting or splicing.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2011-2013 Toyota Corolla,Matrix
Engine / Chassis 2ZR-FE 1.8L / E140
Sensor Configuration 4-Wire Heated Zirconia & A/F
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-9112, 234-4305, 8946702070, 8946774040

Compatibility

  • 2011-2013 Toyota Corolla 1.8L
  • 2011-2013 Toyota Matrix 1.8L

Frequently Asked Questions & Fitment Warnings

Does this fit the E140 Corolla,Matrix?

Yes. Fits 2011-2013 Toyota Corolla,Matrix with the 2ZR-FE 1.8L engine. Excludes 2.4L (2AZ-FE) Matrix and Corolla XRS trims.

Will this clear P0138, P0141, or P0420 codes?

Yes, when caused by faulty 8946702070 or 8946774040 sensors. If P0420 persists, test catalytic converter efficiency.

Are OEM connectors included for installation?

Yes. Both sensors include factory 4-pin plugs for plug-and-play installation; torque to 30 ft-lbs.

The Toyota Precision Standard

Engineered for the emissions compliance and ECM accuracy required by Toyota 2ZR-FE platforms, this matched sensor set restores clean fuel trims and CEL-free operation.




Mueble

Hacer

Toyota

Tamaño del motor

  • 1.8L

Año

  • 2011
  • 2012
  • 2013

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Toyota Corolla Matrix (2011-2013) 1.8L

$59.95