Saltar al contenido del producto
1 de 4

O2 Oxygen Sensor Upstream Downstream for Toyota Camry (2018-2021) 2.5L



Precio regular $59.95
Precio de oferta $59.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2018-2021 Toyota Camry (XV70)

What it Does: This 2-piece upstream and downstream oxygen sensor kit restores closed-loop air-fuel ratio calibration and post-catalytic converter monitoring on the 2018-2021 XV70 Toyota Camry A25A-FKS 2.5L engine.

The Stock Toyota Camry Oxygen Sensor Failure

Factory oxygen sensors on the XV70 Camry equipped with the A25A-FKS 2.5L engine endure continuous thermal cycling and exhaust gas contamination. Over time, carbon deposits, moisture condensation, and thermal shock degrade the zirconia ceramic sensing element and internal heating circuit, leading to sluggish response times or complete heater burnout. When the upstream air-fuel sensor drifts out of range or the downstream monitor fails, the ECM logs fault codes like P0133, P0135, or P0141 and forces open-loop fueling.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / O2 DTCs: Stored fault codes such as P0133 (slow sensor response), P0135 (upstream heater circuit malfunction), or P0136/P0141 (downstream circuit faults) triggered by biased voltage output or open heater resistance.
  • Rough Idle & Throttle Hesitation: Inaccurate stoichiometric feedback forces the ECM into improper fuel trim corrections, causing unstable idling and hesitation under acceleration.
  • Failed Emissions & Elevated Fuel Consumption: Incomplete readiness monitors, skewed post-cat readings that can trigger false P0420 catalyst efficiency alerts, and wasted fuel from uncalibrated fueling.

The Direct-Fit Stainless Oxygen Sensor Solution

Replacing both sensors as a matched pair restores synchronized pre- and post-catalytic exhaust telemetry across the A25A-FKS exhaust tract. Built with laser-welded stainless steel housings, dual-shielded sensing tips, and fast-acting internal heaters, these direct-fit sensors resist thermal shock and exhaust corrosion while matching OEM specs 89467-33290 and 89467-33210 (interchange 234-9307 / 234-9304). Factory-molded wiring harnesses plug directly into the OEM chassis connectors with zero cutting or splicing required.

What's Included

  • 1 Upstream Oxygen Sensor (Pre-Catalytic Converter)
  • 1 Downstream Oxygen Sensor (Post-Catalytic Converter)

Technical Specifications

Fitment 2018-2021 Toyota Camry
Engine / Chassis A25A-FKS 2.5L I4 / XV70
Emissions & Sensing Spec Direct-Fit Heated Upstream Air-Fuel & Downstream Zirconia Sensors
Installation Type Direct Bolt-On OEM Replacement (Plug-and-Play Connectors, No Splicing)
Replaces OEM Part # 8946733290, 89467-33290, 89467-33210, 8946733210, 234-9307, 234-9304, 2349307

Compatibility

  • 2018 Toyota Camry 2.5L (4-Cylinder)
  • 2019 Toyota Camry 2.5L (4-Cylinder)
  • 2020 Toyota Camry 2.5L (4-Cylinder)
  • 2021 Toyota Camry 2.5L (4-Cylinder)

Frequently Asked Questions & Fitment Warnings

Does this fit the XV70 Camry?

Yes. This is a direct fit for the 2018-2021 Toyota Camry equipped with the A25A-FKS 2.5L 4-cylinder engine. Does not fit 3.5L V6 (2GR-FKS) models; always confirm engine displacement and factory connector style before ordering.

Will this clear O2 sensor fault codes and allow emissions monitors to set?

Yes. Replacing worn pre-cat and post-cat sensors resolves sensor-induced faults such as P0133, P0135, and P0141. After installation, clear stored DTCs and complete a full drive cycle so the ECM can run both upstream and downstream readiness monitors.

Do these sensors require wire splicing or anti-seize on the tip?

No wire splicing is required. Both units include factory-style direct-fit connectors; keep grease and anti-seize strictly off the sensing element tip, thread each sensor in by hand to avoid cross-threading, and torque to specification.

The Toyota Precision Standard

Maintaining balanced closed-loop fuel trims and verified catalytic converter efficiency keeps your XV70 Camry running clean, responsive, and CEL-free. Servicing both upstream and downstream positions together eliminates mismatched sensor response rates for consistent factory drivability.




Mueble

Hacer

Toyota

Tamaño del motor

  • 2.5L

Año

  • 2018
  • 2019
  • 2020
  • 2021

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Toyota Camry (2018-2021) 2.5L

$59.95