Saltar al contenido del producto
1 de 4

O2 Oxygen Sensor Upstream Downstream for Toyota Avalon (2008-2011) 3.5L



Precio regular $116.95
Precio de oferta $116.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2008-2011 Toyota Avalon (GSX30)

What it Does: This 4-piece O2 sensor kit restores accurate air-fuel feedback and catalyst monitoring on the 2008-2011 Toyota Avalon GSX30 equipped with the 2GR-FE 3.5L V6.

The Stock Toyota Avalon Oxygen Sensor Failure

Factory upstream and downstream oxygen sensors on the GSX30 equipped with the 2GR-FE 3.5L V6 suffer from thermal cycling, internal heater circuit burnout, and carbon or silicone contamination. Exhaust heat soak slows sensor voltage switching, skewing fuel trim feedback to the ECM. When one sensor lags, remaining aged units create bank-to-bank imbalances that trigger P0135, P0155, P0420, or P0430 codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers heater circuit or catalyst efficiency codes such as P0135, P0155, P0420, or P0430.
  • Rough Idle & Hesitation: Biased pre-cat readings force erratic short-term and long-term fuel trim corrections under load.
  • Failed Emissions & Poor MPG: Incomplete readiness monitors increase fuel consumption and fail emissions inspections.

The Direct-Fit 4-Piece Oxygen Sensor Solution

Replacing all four sensors together eliminates bank-to-bank fuel trim discrepancies on the 2GR-FE engine. Each unit includes factory-matched OEM connectors for zero splicing, stainless steel housings, and high-temp zirconia elements built for sustained exhaust heat. Direct interchange for 234-9008, 234-9022, 234-4064, and 234-4260 guarantees proper thread pitch, accurate pre-cat wideband readings, and reliable post-cat readiness monitoring so the ECM stabilizes closed-loop fueling.

What's Included

  • 2 Upstream Oxygen Sensors (Pre-Catalytic Converter)
  • 2 Downstream Oxygen Sensors (Post-Catalytic Converter)

Technical Specifications

Fitment 2008-2011 Toyota Avalon
Engine / Chassis 2GR-FE 3.5L V6 / GSX30
Emissions & Sensor Spec Heated Zirconia Element / Direct-Fit OEM Connectors
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-9008, 234-9022, 234-4064, 234-4260

Compatibility

  • 2008-2011 Toyota Avalon 3.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the GSX30 Avalon?

Yes. Fits the 2008-2011 Toyota Avalon with the 2GR-FE 3.5L engine. Excluded: other model years, engines, or mismatched connector styles.

Will this clear P0420/P0430 codes without wire splicing?

Yes, zero splicing is needed. Direct-fit OEM connectors plug straight in; clear stored P0420/P0430 or P0135 codes and complete a drive cycle.

How should these sensors be installed?

Thread by hand before torquing to specification. Keep anti-seize and grease off the sensing tip to prevent element contamination.

The Toyota Precision Standard

Built for emissions compliance and closed-loop ECM precision on your GSX30 Avalon, this 4-sensor kit restores balanced fuel trim and CEL-free drivability.




Mueble

Hacer

Toyota

Tamaño del motor

  • 3.5L

Año

  • 2008
  • 2009
  • 2010
  • 2011

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Toyota Avalon (2008-2011) 3.5L

$116.95