Saltar al contenido del producto
1 de 3

O2 Oxygen Sensor Upstream Downstream for Toyota 4Runner (2005-2009) 4.7L



Precio regular $149.95
Precio de oferta $149.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2005-2009 Toyota 4Runner (N210)

What it Does: This 4-piece oxygen sensor kit replaces all upstream and downstream sensors on the 2005-2009 Toyota 4Runner (N210) 2UZ-FE 4.7L V8 to restore closed-loop fuel trim and catalyst monitoring.

The Stock Toyota 4Runner O2 Sensor Failure

On the N210 equipped with the 2UZ-FE 4.7L V8, factory oxygen sensors endure severe exhaust thermal cycling, carbon fouling, and internal heater degradation over high mileage. Thermal shock fractures the zirconia sensing core or burns out the platinum heater circuit, causing sluggish voltage switching. When sensors fail, the ECM loses closed-loop fuel control, triggering P0135, P0155, P0133, or P0420/P0430 codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Stored codes like P0135, P0155, or P0171/P0174 caused by open heater circuits or slow sensor response.
  • Erratic Closed-Loop Fueling: Biased upstream readings skew bank fuel trims, causing rough idle and throttle hesitation.
  • Failed Emissions & MPG Drop: Degraded downstream signals prevent readiness monitors from setting and increase fuel consumption.

The Direct-Fit Oxygen Sensor Solution

Replacing all four pre-cat and post-cat sensors together restores symmetrical bank-to-bank air-fuel feedback across both cylinder heads on the 2UZ-FE 4.7L V8. Each direct-fit sensor features OEM connectors, heat-resistant harnesses, and durable ceramic sensing elements engineered to withstand exhaust heat soak without splicing. Replacing 8946704020 and 234-9051 assemblies as a matched set prevents skewed trims between fresh and aging partner sensors.

What's Included

  • 2 Upstream Oxygen Sensors (Pre-Catalytic Converter)
  • 2 Downstream Oxygen Sensors (Post-Catalytic Converter)

Technical Specifications

Fitment 2005-2009 Toyota 4Runner
Engine / Chassis 2UZ-FE 4.7L V8 / N210
Sensor Architecture 4-Piece Direct-Fit (2 Upstream / 2 Downstream)
Installation Type Direct Thread-In OEM Replacement (Plug-and-Play)
Replaces OEM Part # 8946704020, 234-9051

Compatibility

  • 2005-2009 Toyota 4Runner (4.7L V8 2UZ-FE, N210 Chassis — confirm engine displacement, year, and connector style)

Frequently Asked Questions & Fitment Warnings

Does this fit the N210 4Runner?

Yes. Direct fit for the 2005-2009 Toyota 4Runner equipped with the 2UZ-FE 4.7L V8 engine. Excludes 4.0L V6 (1GR-FE) and 2003-2004 4.7L models; confirm connector style before ordering.

Will this clear P0135/P0155 or P0420 codes?

Yes, when sensors are faulty. Fresh sensors resolve heater and slow-response codes like P0135 and P0155, whereas melted substrates triggering P0420/P0430 require converter replacement.

Do these require splicing or special install prep?

No splicing is required. Keep grease and anti-seize off sensor tips, hand-thread before torquing to spec, clear stored codes, and complete a drive cycle.

The Toyota Heavy-Duty Standard

Built for high-mileage N210 rigs under towing load, matched sensor feedback keeps exhaust temperatures controlled and fueling crisp. Reliable closed-loop monitoring preserves 2UZ-FE 4.7L V8 durability and emissions readiness.




Mueble

Hacer

Toyota

Tamaño del motor

  • 4.7L

Año

  • 2005
  • 2006
  • 2007
  • 2008
  • 2009

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Toyota 4Runner (2005-2009) 4.7L

$149.95