Saltar al contenido del producto
1 de 2

O2 Oxygen Sensor Upstream Downstream for Subaru Impreza (2010-2011) 2.5L



Precio regular $73.95
Precio de oferta $73.95 Precio regular
Envío calculado al finalizar la compra.
  • Pago totalmente seguro
  • Con la confianza de miles de personas
  • Calificado y revisado

¿Lo quieres pronto ? Haz tu pedido antes de

I18n Error: Missing interpolation value "end_date" for "Termina el {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2010-2011 Subaru Impreza (GE/GH)

What it Does: This matched upstream and downstream O2 sensor kit restores closed-loop air-fuel monitoring and catalyst efficiency checks on 2010-2011 GE/GH Subaru Impreza models with the EJ253 2.5L engine.

The Stock Subaru Impreza Sensor Failure

Factory oxygen sensors on the GE/GH Impreza with the EJ253 2.5L SOHC engine endure constant exhaust thermal cycling, moisture, oil, and carbon contamination. Over time, the zirconia sensing element suffers thermal shock fractures and fouling, slowing voltage switching response. Heater circuit resistance spikes also occur from heat soak near the exhaust manifold. Once switching lags, the ECU logs codes like P0137, P0171, or P0420.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Logs P0137 (low downstream voltage), P0037 (heater failure), or P0420 from sluggish switching.
  • Fuel Trim Instability: Erratic upstream feedback causes rough cold starts and surging idle on the EJ253.
  • Fuel Economy Loss: Forces open-loop fueling, raising emissions and cutting MPG.

The Direct-Fit Zirconia O2 Sensor Solution

Replacing upstream and downstream sensors together eliminates voltage baseline drift between pre-cat and post-cat readings on the GE/GH platform. Each sensor uses a laser-welded stainless protective shield and rapid-heating zirconia element built to resist exhaust fouling. Factory-style OEM connectors and pre-terminated leads plug straight into the EJ253 2.5L wiring harness without splicing. Direct-fit 22690AA56A interchange geometry ensures leak-free sealing in factory exhaust bungs.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2010-2011 Subaru Impreza
Engine / Chassis EJ253 2.5L / GE/GH
Emissions & Sensing Upstream A/F & Downstream Heated Zirconia
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 22690AA56A

Compatibility

  • 2010-2011 Subaru Impreza 2.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the GE/GH Impreza?

Yes. Direct fit for the 2010-2011 Subaru Impreza with the EJ253 2.5L engine. Confirm engine before ordering; excludes turbocharged WRX/STI trims.

Will this clear P0137 or P0420 codes?

Yes, if sensor-induced. Restores EJ253 closed-loop fuel trims and catalyst monitoring, resolving P0137 and P0420 faults unless the converter core failed.

Is wiring splicing required for installation?

No. Plug-and-play OEM connectors thread directly into factory bungs; keep sensing tips clean during installation.

The Subaru Precision Standard

Engineered for JDM boxer durability, this matched O2 sensor kit restores sharp throttle response and clean emissions. Maintain factory closed-loop accuracy without check engine lights.




Mueble

Hacer

Subaru

Tamaño del motor

  • 2.5L

Año

  • 2010
  • 2011

Garantía

Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

O2 Oxygen Sensor Upstream Downstream for Subaru Impreza (2010-2011) 2.5L

$73.95