O2 Oxygen Sensor Upstream Downstream for Subaru Baja (2003-2006) 2.5L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2003-2006 Subaru Baja (BT)
What it Does: This 2-piece upstream and downstream oxygen sensor kit for the 2003-2006 Subaru Baja (BT) with the EJ25 2.5L engine measures pre- and post-catalytic converter exhaust oxygen to maintain accurate fuel trim and verify catalyst efficiency.
The Stock Subaru Baja Oxygen Sensor Failure
On the BT Subaru Baja powered by the EJ25 2.5L engine, factory oxygen sensors endure severe exhaust heat cycling and carbon fouling. Over time, the sensing element slows or suffers heater burnout, sending biased voltage to the ECM. Leaving an aged partner sensor installed creates mismatched pre-cat and post-cat readings. This skews closed-loop fueling and triggers diagnostic trouble codes like P0130, P0135, P0141, or P0420.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / DTCs: Stored codes such as P0135, P0141, or P0420 from heater circuit failure or slow sensor response.
- Drivability & Fuel Consumption: Rough idle, hesitation, and higher fuel use caused by inaccurate fuel trim feedback.
- Emissions Compliance Failure: Incomplete oxygen sensor and catalyst readiness monitors that prevent passing emissions testing.
The Direct-Fit Upstream & Downstream Oxygen Sensor Solution
Installing this matched 2-piece kit restores synchronized pre-cat and post-cat exhaust monitoring on your BT Baja. Each direct-fit sensor features the factory connector style, eliminating generic lead splicing for clean signal integrity. Built to interchange with OEM numbers AA2344706, AA234-4706, A-234-4132, A-2344132, and 10325229, both threaded bodies seat directly into stock exhaust bungs. Keep anti-seize off the sensing tip, hand-thread before torquing, and complete a drive cycle.
What's Included
- 1 Upstream Oxygen Sensor
- 1 Downstream Oxygen Sensor
Technical Specifications
| Fitment | 2003-2006 Subaru Baja |
|---|---|
| Engine / Chassis | EJ25 2.5L / BT |
| Emissions & Sensor Spec | Pre-Cat & Post-Cat Direct-Fit Heated O2 Sensors |
| Installation Type | Direct-Fit OEM Replacement (No Splicing or Cutting) |
| Replaces OEM Part # | AA2344706, A-234-4132, A-2344132, 10325229, AA234-4706 |
Compatibility
- 2003-2006 Subaru Baja 2.5L (Confirm engine displacement, model year, and connector style against your vehicle before ordering)
Frequently Asked Questions & Fitment Warnings
Does this fit the BT Baja?
Yes. This is a direct fit for the 2003-2006 Subaru Baja (BT) equipped with the EJ25 2.5L engine. Verify your exact model year, engine displacement, and connector style prior to ordering; do not assume coverage for other engines or years.
Will this clear P0135, P0141, or P0420 codes?
Yes, when faulty sensors are the root cause. Replacing both upstream and downstream units restores pre- and post-cat monitoring; clear stored diagnostic codes after installation and complete a drive cycle so readiness monitors can run.
Is wire splicing or special prep required for installation?
No splicing is required. Both direct-fit connectors match factory harnesses. Handle the sensor tip carefully, keep grease and anti-seize off the sensing element, hand-thread the body first, and tighten to specified torque.
The Subaru Precision Standard
Matched upstream and downstream oxygen sensors keep the EJ25 2.5L boxer engine running at stoichiometric precision with crisp throttle response and CEL-free operation. Servicing both positions together prevents skewed fuel trims and eliminates repeat emissions testing failures.
Mueble
Mueble
|
Hacer |
Subaru |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$65.95