O2 Oxygen Sensor Upstream Downstream for Pontiac G5 (2009-2010) 2.2L
No se pudo cargar la disponibilidad de recogida
- Pago totalmente seguro
- Con la confianza de miles de personas
- Calificado y revisado
¿Lo quieres pronto ? Haz tu pedido antes de
Compre con seguridad
Asegure su experiencia de compra con varios métodos de pago seguros y confiables.
Direct-Fit Upstream & Downstream O2 Sensor Kit for 2009-2010 Pontiac G5 (GM Delta)
What it Does: This matched upstream and downstream oxygen sensor kit monitors pre- and post-catalytic exhaust gas oxygen levels on the 2009-2010 Pontiac G5 (GM Delta) LAP 2.2L Ecotec to regulate closed-loop fuel trim and catalyst efficiency.
The Stock Pontiac G5 O2 Sensor Failure
High exhaust gas temperatures and thermal cycling inside the GM Delta exhaust manifold and mid-pipe gradually degrade the factory zirconia sensing elements on the LAP 2.2L Ecotec. Carbon soot, oil vapor, and silicone contamination foul the porous platinum electrodes, causing sluggish voltage switching between 0.1V and 0.9V. Internal heater circuit fatigue frequently triggers P0135 or P0141 fault codes, forcing the ECM into open-loop fueling and hurting fuel economy.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / Heater DTCs: Illuminated MIL storing P0131, P0135, P0137, or P0141 due to slow response or open internal heater circuits.
- Erratic Fuel Trim & Rich Idle: Sluggish upstream switching causes the ECM to over-fuel, producing rough idle, hesitation, and strong raw fuel odor.
- Failed Emissions Inspection: Compromised downstream signal skews catalyst monitor readiness, preventing OBD-II drive cycle completion or triggering false P0420 warnings.
The Direct-Fit Heated Zirconia O2 Sensor Solution
Engineered as a matched pair replacing 234-4066 (upstream) and 234-4668 (downstream), these sensors restore rapid closed-loop air-fuel metering across the LAP 2.2L Ecotec powerband. Each unit utilizes a fast-light-off internal ceramic heater, corrosion-resistant stainless steel housing, and laser-welded protective shield to withstand thermal shock. Factory-style weatherproof connectors and exact harness lengths ensure true plug-and-play installation with zero splicing.
What's Included
- 1x Upstream Oxygen Sensor (Pre-Catalytic Converter)
- 1x Downstream Oxygen Sensor (Post-Catalytic Converter)
Technical Specifications
| Fitment | 2009-2010 Pontiac G5 |
|---|---|
| Engine / Chassis | LAP 2.2L Ecotec I4 / GM Delta |
| Sensor Architecture | Heated Zirconia Planar Element (4-Wire Direct-Fit) |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Splicing) |
| Replaces OEM Part # | 234-4066, 234-4668 |
Compatibility
- 2009 Pontiac G5 (2.2L L4)
- 2010 Pontiac G5 (2.2L L4)
Frequently Asked Questions & Fitment Warnings
Does this fit the GM Delta G5?
Yes. This kit is a direct fit for the 2009-2010 Pontiac G5 equipped with the LAP 2.2L Ecotec engine. Not compatible with 2.4L engines or 2007-2008 model years; confirm engine displacement before ordering.
Will replacing both sensors clear P0135 and P0141 codes?
Yes, provided wiring is intact. Installing fresh upstream (234-4066) and downstream (234-4668) sensors restores heater resistance and voltage switching after clearing stored DTCs with an OBD-II scanner.
Is special preparation required for installation?
Standard 22mm O2 socket recommended. Apply penetrating oil to seized exhaust bungs, verify connector pin alignment, and torque sensors to factory spec without getting anti-seize on the sensor tip.
The Pontiac Precision Standard
Built to restore factory ECM feedback accuracy, this matched O2 sensor pair keeps your GM Delta running clean, efficient, and emissions-compliant. Count on crisp throttle response, balanced fuel trims, and reliable CEL-free operation mile after mile.
Mueble
Mueble
|
Hacer |
Pontiac |
|---|---|
|
Tamaño del motor |
|
|
Año |
|
Garantía
Garantía
Todos los productos están respaldados por nuestra garantía limitada de por vida. Confiamos en nuestra calidad. [Ver términos y condiciones]

Compras seguras
En nuestra tienda Shopify, priorizamos tu seguridad. Así es como garantizamos una experiencia de compra segura:
1. Transacciones seguras: utilizamos encriptación avanzada para proteger su información personal y de pago, garantizando que se transmita y resguarde de forma segura.
2. Pasarelas de pago confiables: Nuestra tienda se integra con pasarelas de pago confiables, lo que garantiza que sus transacciones se procesen de forma segura y eficiente.
3. Privacidad de datos: Su privacidad es nuestra máxima prioridad. Seguimos estrictas políticas de protección de datos para mantener la confidencialidad y seguridad de su información personal.
4. Plataforma segura: Shopify ofrece funciones de seguridad sólidas y monitoreo continuo contra vulnerabilidades, lo que garantiza un entorno de compra seguro.
5. Comerciantes verificados: Somos un comerciante verificado en Shopify, comprometido a proporcionar productos auténticos y de alta calidad.
6. Políticas transparentes: Nuestras políticas claras de devolución, reembolso y envío brindan tranquilidad, sabiendo que respaldamos nuestros productos.
7. Atención al cliente: Nuestro dedicado equipo de atención al cliente está listo para ayudarle con cualquier inquietud o pregunta que pueda tener.
Compre con confianza en nuestra tienda Shopify, donde su seguridad y satisfacción son nuestras principales prioridades.
$45.95